| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Item 31. The user could not tell which button Enter would press on the
unsynced-changes dialog.
The code was already correct: setDefaultButton() is called, and Qt agrees,
isDefault() and hasFocus() are both true on "Sync and quit". The active
style, qt6ct-style, simply draws no visible default-button decoration. The
GIMP dialog offered for comparison is GTK drawing its own focus ring, a
different toolkit.
Naming the default in the text rather than restyling the button:
overriding the appearance means fighting the user's theme, which is worse
than one word. The safe option was already the default, so no behaviour
changed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Items 29 and 32.
29 was a constraint item 27 specified and that shipped unbuilt: while a
cron sync held the lock the Sync button stayed clickable, and pressing it
could only produce the EX_TEMPFAIL skip. The progress bar and the button
are now written by one updateSyncControls() taking both sync sources,
which the item asked for by name: two independent assignments, one per
path, means whichever finishes second wins, so a background sync ending
would re-enable the button in the middle of a local run.
Unknown re-enables the button, deliberately. It means /proc/locks could
not be read and nothing was observed, so leaving the button disabled
would strand it permanently wherever the lock cannot be seen.
32 adds a clear_pane action on Esc. It clears m_currentThreadId with the
pane, not merely alongside it, or a threadLoaded still in flight would
paint the thread straight back; and it cancels any pending mark-read,
since a thread blanked from view must not be marked read two seconds
later. The selection, the query and the undo stack are untouched.
The one real risk in 32 was Escape being stolen from the query
completer, the way Return was once lost to a window shortcut. Probed
rather than reasoned about: a popup consumes the key before a
window-level shortcut sees it, so the completer still dismisses.
Every test here was verified by reverting the code it covers.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
The backlog is downstream of the user's own notes, which they add to while
using the app. Comparing the two turned up nine entries with no item here,
two of them defects rather than enhancements:
- Re-adding `unread` after the automatic mark-read counts 2 unsynced
changes when the mail store is back where it started. The counter
counts writes and never decrements, so any add-then-remove of the
same tag inflates it (item 28).
- The Sync button stays enabled while a background sync holds the lock.
That was a written constraint of item 27 and shipped unbuilt, which
is the strongest argument for doing this comparison at all (item 29).
The rest are enhancements: a useful blank right pane, for which the user
has produced the two logo images added here; a default button on the quit
prompt, recorded as needing a repro because the code does set one; Esc to
blank the pane; expiring status messages; a Maildir overview; and an
automatic refresh after a sync.
Item 35 is the one 0.8.0 deliberately did not build. A background sync
reports rather than refreshes, because runCurrentQuery() clears the undo
stack, the selection and the message pane. A non-destructive refresh is
real work, so it is an item rather than a flag.
Item 27 gains its outcome, including that its own proposed approach was
the wrong one: flock -n acquires in order to test, so polling with it
would have caused the exact skips the sync script reports.
CLAUDE.md now carries the reconciliation step, since a note saying "X is
broken" is a bug report that will sit in a personal file indefinitely
unless someone goes looking.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Real Maildir account keys had reached comments and test data:
provider-and-mailbox names across three source files, one of them
carrying a surname, plus a real address used as example data in the
notmuch test fixture and the design spec.
The user's standing rule is that maildir and account names never reach a
commit, and this is about to become a public repository, which is what
makes it consequential rather than untidy. Replaced with generic keys
that carry the same shape, since the length is the point in every one of
these comments: a 33-character account tag is why the chip label exists
and why the tag column was removed.
The measurements stay. They are the evidence behind those decisions and
are not personal details.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Four changes to the sync UI, three of them from using it.
The log pane could not be dismissed. It is hidden at construction and
shown on failure, and nothing ever hid it again, so a single failed sync
left it on screen until the application restarted. It now sits in a
container with its own Close button, and is 200px rather than 120,
because mbsync's output is wide and repetitive and the shorter pane
showed too little of it to read. It still appears only on failure, which
the user confirmed is what they want.
A sync gives no feedback while it runs. The status bar now carries an
indeterminate progress bar for the duration, and the Sync button is
disabled rather than left looking live. The bar is indeterminate on
purpose: mbsync reports no percentage and the script's output is
unstructured, so a bar filling left to right would be inventing a
fraction nobody knows. The log is also cleared at the start of each run,
since leaving the previous run's lines in place makes a stale failure
look like the current one.
The lock skip was reported as a failure. mailsync.sh exits when another
run holds the lock, and that was exit 1, which qtmaildir reads as "sync
failed": it showed the log pane and, on the exit path, told the user
their changes were still unsynced. With a cron timer every ten minutes,
a click landing inside a run is routine and none of that is true. The
script now exits 75 (EX_TEMPFAIL) and the window reports it as its own
case, saying a sync is already running. On the exit path it stays open
and says plainly that the other run is most likely carrying the changes
over but that this window cannot see it finish, rather than guessing
either way.
That last hedge is what item 27 records: the application cannot see a
sync it did not start. The user chose continuous polling of the lock file
over the narrower "only while quitting" version, and the entry notes that
the lock is already the signal, so no status file is needed, and that a
kernel lock cannot go stale where a written file can.
Verified against stub binaries: a second run while the lock is held exits
75 and says SKIPPED, while the run holding it completes at 0.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Five hardcoded tags were the only ones reachable from the UI: archive,
delete, spam, flag and toggle_unread. For an application whose purpose is
organising mail by tag, applying any other one meant leaving for a
terminal. Item 26 of the usability backlog, raised by the user asking how
to add a tag and finding they could not.
One dialog rather than separate add and remove actions, at the user's
choice: filing something under a new tag while dropping inbox is one
thought, not two. Type tags to add or remove, comma separated, or clear a
checkbox to drop a tag already on the selection without retyping its
name.
Both fields complete against the tag list MainWindow already holds for
the query completer. Completion is a guard against typing shoppping
beside shopping, never a whitelist: inventing a tag is the entire point,
so any valid name goes through whether or not it exists yet.
Tri-state checkboxes carry the multi-thread case, and are where the risk
is. A tag on some selected threads shows partially checked, and leaving
it alone changes nothing; the opposite reading would silently tag threads
the user never looked at. A tag already on every thread and left checked
is likewise not a change and is not sent as one.
Tag names are validated before anything is applied, through a free
function so the rules are testable on their own. Empty, a leading dash
(notmuch's CLI reads it as removal, making such a tag a trap), whitespace
and control characters are refused by name and reason. Nothing is applied
until the whole set passes, since the user cannot tell which half of a
partial change landed.
TagDialog is pure UI: handed the vocabulary and the current state,
returning two lists, contacting no worker. That is what lets its fifteen
tests run without a notmuch database. Integration is a single call to the
existing tagSelected(), so undo, the optimistic model update, the
combined multi-row query and the completer refresh for a brand-new tag
all come for free.
One test assumption was wrong and the code was right: a case asserted
that QStringLiteral("null\0byte") truncates at the null and reads as
empty. It does not, so the null is caught as a control character. The
test was corrected rather than the validator.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
The user asked how to add a tag to a message and the answer is that you
cannot: every tagging action writes a hardcoded name, so archive, delete,
spam, flag and toggle_unread are the only tags reachable from the UI. For
an application whose purpose is organising mail by tag, that is a hole
worth its own item rather than being folded into item 25.
The plumbing is already there. tagSelected() takes arbitrary add and
remove lists, applyTagsToThreads() handles multi-row selections in one
query, undo works, and the completer already holds every tag in the
database, which is what makes completing the dialog's input the obvious
guard against creating 'shoppping' beside 'shopping'.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Right-click actions on the thread list, and select-all for bulk tagging.
Item 24 records that there is no context menu anywhere in the
application: no contextMenuEvent override and no CustomContextMenu policy
in src/. The actions themselves already exist as QActions, so the work is
presentation, with one trap worth naming: right-clicking does not change
the selection in Qt, so a menu built naively would act on the row under
the cursor while the user is looking at several selected rows.
Item 25 is smaller than it sounds, and the entry says why. The thread
view is already ExtendedSelection and tagSelected() already acts on every
selected row through one combined query, so Ctrl+click bulk tagging works
today. What is missing is a select_all action, which does not exist for
the list, and any indication that multi-select is possible at all. It
also carries a caution: select-all over a 10k-thread query turns a rare
accident into a routine keystroke, and the combined-query design should
be measured against a real query before the binding ships rather than
assumed to scale.
Both are the user's own observations; the plan did not carry either.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Tagging changes the notmuch index at once, but the mail store only hears
about it on the next sync, and nothing said so. Quitting with tagging
outstanding was silent. Items 18 and 19 of the usability backlog, built
together because the second needs the first's counter.
The counter cannot be QUndoStack::isClean(), which is the obvious
candidate and the wrong one: the undo stack is cleared on every query,
since its entries refer to rows the new result set discards. Tag a
thread, run any query, and the stack is empty while the change is still
unsynced. m_pendingEdits is its own count, incremented where a write is
CONFIRMED rather than where one is sent, so an optimistic update the
worker later rejects cannot leave the indicator claiming an edit that
never landed. Only a successful sync resets it: clearing on failure would
assert the changes had reached the mail store when the sync is exactly
what failed to put them there.
It is shown in the status bar, hidden entirely at zero, and described as
a lower bound rather than a guarantee, since an external notmuch run can
carry changes over without this application noticing.
On exit, sync_on_exit in [general] takes ask, always or never. Three
values rather than a bool because "prompt me", "just do it" and "do
nothing" are three behaviours and true/false expresses two; an unknown
value warns by name, since a typo there silently changes what happens to
unsynced work. The prompt offers three buttons for the same reason: a
user who hit Quit by mistake needs a way back that is not "sync". A sync
started at exit holds the window open until it finishes rather than being
killed mid-run, and a sync that FAILS does not quit, because quitting
there would discard the user's choice silently. With no sync command
configured the prompt degrades to a plain warning instead of offering a
sync that cannot run.
This is not a destructive-action confirmation of the kind CLAUDE.md
forbids. Those cover tag mutations, which keep undo instead of a dialog.
This asks about losing work at the one point where undo cannot help.
The tagsApplied lambda became a named slot, which is better structure and
also what lets a test drive it: the worker is deliberately parentless
because it moves to its own thread, so reaching it with findChild to emit
the real signal cannot work, and contorting the test to try was the wrong
instinct. Testing a modal needed its own care. A test that sends a close
event hangs forever if an unexpected dialog opens, because the modal
spins its own event loop; CloseProbe polls for activeModalWidget, closes
it and records that one appeared, turning "a dialog opened" into an
assertion rather than a hang.
Also removes a stray qDebug left in the open_thread action by the earlier
Enter-key investigation, which had reached two commits.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Four items from the user's own notes that this document did not carry.
Item 5 gains two concrete sub-items: a star column for flagged threads,
mirroring the paperclip, and the observation that everything looks
unread. The second is recorded with a warning rather than as a defect,
because bold is already conditional on isUnread() in the model; either
the list really is mostly unread or bold leaks through some other path,
and that has to be reproduced before the font logic is touched.
Item 21, better default shortcuts, records why the defaults moved once
already: a bare letter cannot be a menu accelerator, and a bare capital
parses to a key no keystroke emits. Both still constrain a second pass,
as does the rule against testing reachability with synthetic input.
Item 22 is the translatability audit CLAUDE.md has owed since the tr()
rule was written, plus the loading machinery, which does not exist at
all: no QTranslator, no .ts files, no CMake rule. Those are separate
sizes and the item says so.
Item 23, saving a query from the UI, carries the one real design question
with it: whether the write lands in the hand-edited config or the state
file. Saved queries are user intent rather than machine state, which
argues against the split item 1 established, so the decision is flagged
rather than assumed. It also notes that item 23 may answer postponed item
10 as a side effect, since account-scoped saved queries were exactly what
item 10 proposed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Opening a thread left it tagged unread, so the unread count never
matched what had actually been read and the app was quietly wrong every
day it was used. Item 6 of the usability backlog.
A single-shot timer, armed when a thread is selected and restarted rather
than stacked, so arrowing down a list marks only the thread still
selected when it fires and not every one passed through. Configurable
through mark_read_delay_ms in [general], defaulting to 2000: zero marks
read at once, and any negative value disables the behaviour, which is why
the value is neither clamped nor warned about at either end.
The automatic change deliberately does NOT go on the undo stack. It
routes through sendThreadTagChange() rather than tagSelected(), because
undoing an action the user never took is worse than leaving a thread
read, and toggle_unread already gives them a direct way back. It still
funnels through the single applyTags path; what differs is only whether
the inverse is pushed, which is a window-level decision above the worker.
An explicit toggle_unread cancels any pending timer, or marking a thread
unread by hand would be reversed a moment later and the key would look
broken.
Two guards beyond the plan, both from asking what happens when a timer
outlives the thread it was armed for. Arming is skipped for a thread that
is not unread, so no write is scheduled that would change nothing, and
the handler re-checks that its thread is still selected and still unread
before writing, so a stale timer does nothing rather than tagging the
wrong thread.
The plan expected the rapid-arrow case to need a database and a manual
check. It needs neither: ThreadListModel takes threads through
appendBatch(), so the case is unit-tested. All three tests were confirmed
to fail against deliberately broken versions, one arming for read threads
and one creating a timer per selection instead of restarting one.
Item 7 is closed in the same pass. The user verified against real mail
that HTML messages already open as HTML, which is what the item asked
for, so it is recorded as done with no code changed. The prefer_html key
it floated was not added: nobody has asked to default to plain text, and
Ctrl+H already switches a thread by hand.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
MimeParser has filled To and Cc all along and HtmlBuilder simply never
interpolated them, so both were parsed on every message and then
discarded. The header strip showed the subject and a message count and
nothing else, which is item 2 of the usability backlog.
The header now adapts to what it can say honestly. A thread holding one
message shows From, To and Cc under the subject, where every field is
unambiguous. A thread holding several keeps showing the subject and the
count alone: the recipient differs message to message, and once the user
has replied there is no single address the thread is addressed to, so
naming one would be a guess presented as a fact. Per-message detail is
what the dialog is for.
That dialog lists Subject, From, To, Cc, Date and Message-Id for every
message, numbered when there is more than one, in a read-only plain-text
widget. Plain text is the security decision, not a stylistic one: these
values come from strangers and the dialog exists to show them verbatim,
so the format that cannot interpret markup is the right one. The header
label is RichText and every value interpolated into it is escaped, since
an unescaped From injects into the application's own chrome rather than
into the sandboxed page.
Reached by a Details... button beside the subject and by Ctrl+Shift+D.
Both, because a shortcut alone restates the complaint this backlog opened
with. The binding is shifted because Ctrl+D is delete, and the
destructive action keeps the key it already had rather than being moved
to make room.
An empty Cc omits its row instead of printing a label with nothing after
it. Both header shapes were rendered to PNG and inspected, not only
asserted.
The new button also exposed a latent flaw in an older test:
attachmentButtonLabels() identified attachment buttons by excluding the
one other button's label, so it counted the details button as an
attachment as soon as one existed. It now finds the bar by object name
and reads only its children.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Item 2 (message details) gains the user's decision on where the details
go. The header adapts to what it can say honestly: a single-message
thread shows From, To, Cc and Subject, while a multi-message thread keeps
showing only subject and count. Everything else moves to a popup behind a
button on the right of the header.
An earlier draft also put a recipient line on the thread header, which
forced a choice between the union of recipients and their intersection
and would have needed real address parsing to compute either. The user
called that overcomplicating and dropped it, so no address parsing is
needed and the item is UI work over strings MimeParser already fills.
The item's own "check before building" question is answered in place: To
and Cc are parsed at mimeparser.cpp:344-345 and then dropped at the
renderer, which never interpolates them. The larger task it warned about
does not exist.
Item 10 is postponed at the user's request rather than dropped: the
complaint was real and the cheap first fix it proposes still stands, it
is simply not wanted now. Only its startup-query half ever shipped.
Items 18 and 19 come from the user's own notes and were missing here: a
visual cue for unsynced edits, and a sync-on-exit prompt with a config
option. 18 records a finding that shapes both: the QUndoStack looks like
a record of pending edits but is cleared on every query, so it cannot
drive the indicator and a separate counter is needed.
Item 20 records, unspecified, that the user's mental model of the thread
view differs from what was built. Nothing is designed there yet; the next
step is asking what they pictured.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Records what shipped rather than what the plan drafted: path: is the only
prefix beyond tag:/is:/date:/mimetype: that offers values, and completion_on_focus
defaults to false.
The extra_mimetypes syntax needs both separators explained, since ',' splitting
is QSettings' own behaviour and '|' exists only because a description may contain
a comma.
|
|
Packages the application for Slackware, following SBo conventions with
two deliberate departures: the tag is _danix rather than _SBo and the
package type is txz rather than tgz, since this is not an SBo
submission. sbolint reports exactly those two as errors and nothing
else; the template comments it warned about are gone.
Written against the install layout the build really produces, checked by
staging it: one binary, one .desktop entry and one scalable icon, no
libraries and no man or info pages. The template's .la removal, man and
info compression and perllocal.pod cleanup would all act on nothing
here, so they are left out rather than carried along as dead code.
doinst.sh keeps only the desktop-database and icon-cache updates.
The download URL and checksum are verified rather than assumed: sbodl
fetches the tarball and reports "md5sum matches OK".
Adds QTMAILDIR_BUILD_TESTS, defaulting to ON so the ordinary build is
unchanged. A packaging build has no use for the test binaries, and
building them pulls in Qt6::Test to produce nothing that ships. Note the
0.4.0 tarball predates this option, so with that source the flag is
accepted but does nothing; the README says so.
notmuch is the only dependency outside Slackware. Qt6 including
WebEngine, gmime and cmake are all stock, which is what REQUIRES
reflects.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
The attachment bar had been an empty placeholder since it was written:
MessageView created it and added it to the layout, and nothing ever put
anything in it. MimeParser had been extracting attachments the whole
time and Attachment::saveTo() already carried the path-traversal guard,
so the backend needed calling rather than writing.
The bar holds one "Attachments (N)..." button whatever the count. One
button per file was built first and was wrong: a thread with sixteen of
them made the bar as wide as the window, pushed the splitter over and
left the thread list a few pixels wide. The button opens a dialog
listing message number, filename and size with a Save each, and a
"Save all..." when there is more than one.
Save all writes into a new subdirectory named "<date> <subject>" inside
a parent the user picks, rather than dropping sixteen files loose among
whatever is already there. Zipping was considered and rejected: Qt ships
no zip API, so a real archive meant a new build dependency or shelling
out to /usr/bin/zip at runtime, and a subdirectory answers the actual
requirement. The picker names the subfolder before the user commits to a
location.
The subject is attacker-controlled and becomes a directory name, so
attachmentFolderName() sits beside the other guards in mimeparser.cpp:
it strips separators, control characters and leading dots, caps the
length, and falls back to a generated name. Its test asserts that every
hostile subject still resolves inside the parent directory.
Two defects surfaced while using it, both silent:
saveTo() overwrites an existing file, and several messages in one thread
commonly attach the same filename. Saving that thread destroyed six of
sixteen files while reporting all sixteen as saved. The batch path now
uses saveWithoutOverwriting(), which appends " (2)" before the extension
and keeps a compound extension whole.
Qt::RFC2822Date rejects a Date header that carries a timezone comment,
"+0200 (CEST)", which is legal per RFC 5322 and common in real mail. Qt
refuses the entire string rather than ignoring the comment, so every
such message lost its date prefix. Comments are stripped before parsing.
Opening an attachment in its default application is deliberately not
included: handing a file from a stranger to xdg-open is a different
security decision from writing it where the user asked.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Attachments turned out to be a real gap rather than a discoverability
one. MessageView creates the attachment bar and adds it to the pane, but
nothing ever populates it: m_attachmentBar appears nowhere else in the
codebase, so it has never displayed anything. MimeParser already
extracts attachments and Attachment::saveTo() already carries the
path-traversal guard, so the backend needs calling, not writing.
Item 16 makes delete a toggle, with the open question of what a mixed
selection should do. Item 17 needs a new worker call, since there is no
way to list tags today.
Also records that this document's numbering and the user's own notes
have diverged, so a reference to "item 13" stays resolvable.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
The app opened whichever saved query sorted first alphabetically, which
is not a choice anyone made: [queries] is read through childKeys(), so
savedQueries().first() means "Flagged" before "Inbox" before "Unread"
rather than anything the user expressed.
[general] startup_query names the entry to open and defaults to Unread,
so a fresh install comes up on the unified unread list. Saved-query
button order is untouched and stays alphabetical.
A name matching no saved query falls back to the first one rather than
starting with an empty view. That is reported as a problem only when the
user actually wrote the name; the built-in default naming a query they
never created is not something they got wrong, and warning about it
would fire on every launch of a config that has no Unread entry.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Zoom was Chromium's, not the application's: the web view handled the
keys natively and never told anyone, so there was no value to save.
qtmaildir now owns it. Zoom in, out and reset are real actions, in the
View menu and rebindable through [keys], and the factor is persisted to
the UI state file. Ctrl+wheel over the body zooms and Ctrl+middle-click
resets, both filtered by ancestry from an application-level filter: the
events are delivered to an internal QQuickWidget the web view creates
lazily, so a filter on the view itself never sees them.
The factor is clamped to 0.5 - 3.0, and NaN, infinity, zero and negative
values fall back to 1.0, since a corrupt state file must not be able to
leave the pane unreadable with no visible way back.
Both risks the plan flagged turned out not to exist, verified by probe
rather than assumed. The application QAction wins over the web view's
native zoom key, so the tracked factor cannot diverge from what is on
screen. And the factor survives setHtml(), so the web view is the single
source of truth and needs no reapply per render.
A third finding is worth recording because it produced a wrong fix
first. A probe using QTest::keyClick() reported Ctrl++ as a dead
binding, and a test was written asserting that. Both were wrong: Ctrl++
is exactly what the '+' key emits on an Italian layout, confirmed
against the real keyboard, and it is the shipped default. Whether a
symbol needs Shift is a property of the layout, not of Qt, and
keyClick() reproduces neither. The test now only checks that every
default parses, and the comment in defaultBindings() says not to
re-derive this from synthetic input.
Ctrl+= is a second binding for reset, skipped when [keys] gives it to
something else.
Also fixes a pre-existing bug the new config key exposed. [general]
entries were read as "general/<key>", which matches nothing: QSettings'
INI backend treats a section literally named [general] as its own
fallback section and strips the prefix. notmuch_config had therefore
never worked. Both keys are now read without it; the file format is
unchanged.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Resizing the window, the splitter or a thread-list column was undone by
the next launch. State now round-trips through a separate settings file
at ~/.local/state/qtmaildir/uistate.conf, written on close and read at
startup.
The state file is deliberately not the user's config: a base64 geometry
blob does not belong in a hand-edited file, and rewriting that file on
exit would drop its comments and key order, which QSettings does not
preserve.
Two details that are easy to get wrong:
QStandardPaths::StateLocation appends both the organization and the
application name, and both are "qtmaildir" here, so it resolves to
~/.local/state/qtmaildir/qtmaildir. The path is built from
GenericStateLocation instead, matching Config::defaultPath().
Restore runs after buildMenus() rather than at the end of buildUi():
QMainWindow::restoreState() matches toolbars by object name and silently
drops the position of one that does not exist yet.
Every restore is conditional on a non-empty blob, so a missing or
rejected state file leaves the built-in defaults instead of producing a
zero-size window.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
The icon was committed in a previous session and referenced nowhere: no
qrc, no .desktop entry, no setWindowIcon. It is wired up now, as a window
icon, a desktop entry, and install rules placing both into hicolor and
share/applications.
resources.qrc belongs to the executable rather than to qtmaildir_lib. A
qrc compiled into a static library registers itself from a global
initialiser, and the linker discards that object because nothing
references it: the build succeeded, qInitResources_resources() was
present in the .a, and QFile::exists(":/icons/qtmaildir.svg") still
returned false at runtime. Verified loading at 16, 32 and 64 pixels after
the move.
Toolbar and menu actions take icons from the system theme by their
standard names, so they match the rest of the desktop rather than
shipping bespoke art. A theme lacking one leaves that action as text,
which still works.
|
|
Selecting a thread and hitting Delete changed nothing on screen, so
there was no way to tell the action had stuck.
The tag was always applied: applyTagChange() emitted dataChanged across
the row, and the Tags column did update. But Subject was set to stretch
while Tags came after it, so Subject took all free width and pushed Tags
out of view. The feedback lived in the one column that could not be seen.
Columns are now Tags, Date, From, Subject, with Subject stretching last
so nothing can be pushed off the right edge. A thread tagged deleted or
spam fills its whole row, muted red or orange with white struck-through
text, through the background, foreground and font roles, so no cue
depends on one column remaining visible.
Strike-through accompanies the fill on purpose: it survives a theme that
overrides backgrounds and reads without colour. Bold for unread still
composes with it.
Archive adds no tag, so an archived row is left unstyled for now.
|
|
Actions were a QHash of std::function dispatched by an event filter,
which nothing could put in a menu. They are QActions now, bound from
KeyMap so a [keys] override reaches the menus as well as the keyboard.
Menu bar covers every action; the toolbar carries only Sync, Archive,
Delete and Undo. Help > Keyboard shortcuts is generated from the actions,
so it shows what the keys really do rather than a copy that drifts.
spam and load_remote gained defaults, having been unreachable without a
hand-written binding.
The event filter is gone. Probing showed QAction shortcuts are dispatched
before the focused widget sees the key, so they beat QAbstractItemView's
type-to-search without one, and Qt already suppresses plain-letter
shortcuts while an editable widget has focus. Dropping the filter's
blanket guard also lets Ctrl+Q work while the query bar has focus.
registeredActionNames() is derived from the actions rather than
hand-maintained, so the two drift tests it needed are replaced by checks
that a configured binding reaches its action.
No confirmation dialogs: tag mutations still answer to undo.
|
|
Collects the items found while actually using 0.1.0. Two clusters dominate:
state that does not survive restart (splitter, zoom, account selection) and
actions reachable only by memorized keys.
The plan is open by design rather than a fixed release scope. Numbering is
stable so notes referring to an item keep meaning the same thing.
Decisions recorded while triaging:
- UI state goes to its own file, not qtmaildir.conf. That file is hand-edited
and rewriting it on exit would eat comments QSettings does not preserve.
- Auto-mark-read stays off the undo stack. An explicit toggle_unread action
already exists, so Ctrl+Z need not undo an action the user never took.
- Zoom is Chromium's, not ours. No setZoomFactor call exists in src/, so
persisting it means taking ownership of zoom first.
Icon is a tag rather than an envelope, since tagging is the core interaction
and an envelope would not distinguish it from any other mail client. Verified
legible at 16x16, which is where it is mostly seen.
|
