feat(keyboard): light the AK820 Pro in the wallpaper accentHEADmaster

udt-keyboard sets an Ajazz AK820 Pro to its "launch" effect in the
current accent through ak820-ctl, and does nothing without it.
udt-accent starts it detached on every run; --watch reapplies the
accent when the USB cable is plugged in, since the keyboard takes no
commands over its dongle or Bluetooth.

The firmware ignores a mode change unless the lights go off first and
settle, so it sends off, waits three seconds, then the mode. A lock
keeps a wallpaper change and a plug-in from interleaving the pairs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

1 files changed, 55 insertions, 0 deletions

diff --git a/bin/udt-keyboard b/bin/udt-keyboard
new file mode 100755
index 0000000..e6dc395
--- /dev/null
+++ b/bin/udt-keyboard
@@ -0,0 +1,55 @@
+#!/bin/bash
+# udt-keyboard: light the Ajazz AK820 Pro in the wallpaper accent.
+# Copyright (C) 2026 Danilo M. <danix@danix.xyz>
+# Licensed under the GNU General Public License v2 only.
+#
+# Usage: udt-keyboard           set the keyboard to the current accent
+#        udt-keyboard --watch   do that again every time it is plugged in
+#
+# The colour is the one udt-accent wrote for rofi, so the keyboard follows the
+# wallpaper like the window borders do. udt-accent starts this detached on
+# every run; the watcher is started from hypr-theme's autostart, because the
+# keyboard only takes commands over the USB cable and may be plugged in long
+# after the last wallpaper change.
+#
+# Talks to the keyboard through ak820-ctl, which the udev rule shipped with it
+# lets the logged-in user drive without root. Without ak820-ctl, or with the
+# keyboard on the 2.4G dongle or Bluetooth, this does nothing.
+
+command -v ak820-ctl >/dev/null || exit 0
+
+# "launch": dark until a key is pressed, which lights outward along its row.
+MODE=launch
+
+apply() {
+    local accent
+    accent="$(grep -o 'accent: #[0-9a-fA-F]\{6\}' "$HOME/.cache/udt/udt-accent.rasi" 2>/dev/null)"
+    [ -n "$accent" ] || return 0
+
+    # A wallpaper change and a plug-in can land together, and two interleaved
+    # off/mode pairs leave the keyboard on whichever off came last.
+    exec 9>"${XDG_RUNTIME_DIR:-/tmp}/udt-keyboard.lock"
+    flock 9
+
+    # This firmware ignores a mode change unless the lights were turned off
+    # first and given time to settle; one second was not enough, three is.
+    ak820-ctl light off >/dev/null 2>&1 || return 0
+    sleep 3
+    ak820-ctl light "$MODE" -c "${accent#accent: #}" >/dev/null 2>&1
+}
+
+if [ "$1" != --watch ]; then
+    apply
+    exit
+fi
+
+# One usb_device event per plug-in; its interfaces and hidraw nodes would each
+# fire again. udevadm prints an event once its rules have run, so the uaccess
+# ACL is already in place, but the keyboard needs a moment to boot.
+/sbin/udevadm monitor --udev --subsystem-match=usb/usb_device --property |
+while read -r line; do
+    case "$line" in
+        ACTION=*) action="${line#ACTION=}" ;;
+        PRODUCT=c45/8009/*) [ "$action" = add ] && { sleep 2; apply; } & ;;
+    esac
+done