Drop breaktimer and the archived AI apps

breaktimer is parked and imggen and fanfictioner are archived and
uninstalled, so the shell was reading files nothing writes and offering
buttons that call commands that no longer exist.

Status: remove the bt* properties, the file watchers behind them, the
verb runner and the presentation-mode pause/resume. The status page loses
BreakRow and the tile falls back to "All clear".

AI: remove the imggen and fanfictioner rows from ai-state.sh, their
labels and controls, and the pid-based fanfictioner stop. The sd-cli
engine row stays, since the wallpaper upscaler uses sd-cli too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

4 files changed, 4 insertions, 147 deletions

diff --git a/desktop/modules/status/BreakRow.qml b/desktop/modules/status/BreakRow.qml
deleted file mode 100644
index 8b732b1..0000000
--- a/desktop/modules/status/BreakRow.qml
+++ /dev/null
@@ -1,84 +0,0 @@
-// Copyright (C) 2026 Danilo M. <danix@danix.xyz>
-//
-// This program is free software; you can redistribute it and/or modify
-// it under the terms of the GNU General Public License version 2 as
-// published by the Free Software Foundation.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-// GNU General Public License for more details.
-
-import QtQuick
-import "../.."
-
-// Breaktimer: the daemon's phase and countdown, a pause switch and a
-// start/stop button. Every control is a verb; nothing here writes the
-// daemon's files.
-Item {
-    id: row
-
-    implicitHeight: Math.max(texts.implicitHeight, controls.implicitHeight) + 16
-
-    readonly property string phaseLabel: {
-        if (!Status.btRunning) return "Stopped";
-        if (Status.btPaused) return "Paused";
-        if (Status.btPhase === "breaking") return "Micro-pause";
-        if (Status.btPhase === "longbreak") return "Long pause";
-        return "Working";
-    }
-
-    // A paused countdown is frozen, and a frozen number reads as a bug, so
-    // the paused state says what it is instead of showing one.
-    readonly property string detail: {
-        if (!Status.btRunning) return "Break reminders are not running.";
-        if (Status.btPaused) return "Countdown frozen until resumed.";
-        if (Status.btPhase === "breaking" || Status.btPhase === "longbreak")
-            return "Back to work in " + Status.btCountdown() + ".";
-        return "Next break in " + Status.btCountdown() + ".";
-    }
-
-    Column {
-        id: texts
-        anchors {
-            left: parent.left
-            right: controls.left
-            rightMargin: 12
-            verticalCenter: parent.verticalCenter
-        }
-        spacing: 2
-
-        Text {
-            text: "Breaktimer · " + row.phaseLabel
-            font { family: Theme.fontFamily; pixelSize: Theme.fontSize - 2; bold: true }
-            color: Theme.text
-        }
-
-        Text {
-            width: parent.width
-            wrapMode: Text.WordWrap
-            text: row.detail
-            font { family: Theme.fontFamily; pixelSize: Theme.fontSize - 4 }
-            color: Theme.subtext
-        }
-    }
-
-    Row {
-        id: controls
-        anchors { right: parent.right; verticalCenter: parent.verticalCenter }
-        spacing: 8
-
-        Button {
-            text: Status.btRunning ? "Stop" : "Start"
-            danger: Status.btRunning
-            onClicked: Status.runBreaktimer(Status.btRunning ? "stop" : "start")
-        }
-
-        Switch {
-            id: sw
-            enabled: Status.btRunning
-            checked: Status.btRunning && !Status.btPaused
-            onToggled: Status.runBreaktimer(Status.btPaused ? "resume" : "pause")
-        }
-    }
-}
diff --git a/desktop/modules/status/README.md b/desktop/modules/status/README.md
index d3d0cce..ea069d6 100644
--- a/desktop/modules/status/README.md
+++ b/desktop/modules/status/README.md
@@ -45,7 +45,7 @@ and reasserted when it returns.
 `dnd` has none of its own. It is state the notification daemon reads.
 
 `presentation` sets `dnd`, `nolock` and `quiet`, asserts a Wayland idle
-inhibitor, and pauses breaktimer. Turning it off restores the three to the
+inhibitor. Turning it off restores the three to the
 values they had before rather than clearing them, so hand-set DND or a
 hand-set disable survives a presentation.
 
@@ -71,52 +71,10 @@ The opencode notifier runs its command for every event, `session_started` and
 are off in `opencode-notifier.json`, and it rereads that file on every event,
 so neither change needs an opencode restart.
 
-breaktimer is paused and resumed by verb, never by writing its state file. See
-Breaktimer below, which is also the read direction.
-
-## Breaktimer
-
-The traffic runs both ways, and only one way writes.
-
-**Reading.** The daemon publishes three files the singleton watches:
-
-    $XDG_RUNTIME_DIR/breaktimer.state    running | paused | stopped
-    $XDG_RUNTIME_DIR/breaktimer.phase    working | breaking | longbreak | stopped
-    $XDG_RUNTIME_DIR/breaktimer.remain   seconds left in the phase
-
-exposed as `Status.btState`, `btPhase` and `btRemain`, with `btRunning` and
-`btPaused` derived from the first. The old bar script read the same three
-files; the two consumers never knew about each other.
-
-**Writing: never.** The daemon owns those files and rewrites state and phase on
-every transition, so a second writer would race its loop. Every control calls a
-verb through `runBreaktimer()`, which is why presentation mode has always
-called `pause` rather than writing `breaktimer.state`.
-
-**A stopped daemon** is read from the state file, not probed. Both paths that
-end the daemon write `stopped` there: `stop_daemon`, and the `cleanup` trap on
-`TERM`. A daemon lost to `KILL` leaves a stale `running` and the drawer shows a
-frozen countdown, a visible wrong answer the Start button resolves, which is
-cheaper than a liveness probe on every repaint. QML cannot send a signal, so
-the `kill -0` check the old bar module used is not available here anyway.
-
-**The countdown counts in five second steps**, because that is the daemon's
-tick and the shell does not interpolate between its writes. A local one second
-timer would be a second clock drifting against the first, correcting itself
-with a visible jump every five seconds, and it would keep counting while the
-daemon is frozen outside the work window or paused.
-
-**The tile** shows breaktimer below every mode, so an active mode still owns
-the line and breaktimer replaces only the idle `All clear`. It does not count
-toward `activeCount`: a running daemon is not a mode the user switched on.
-
-The daemon's own configuration lives in `~/.config/breaktimer.conf` and is not
-edited from here; `breaktimer.sh config` prints what is in effect.
-
 ## Game detection
 
 Presentation is set automatically while a game runs, so a fullscreen game does
-not get locked or interrupted by the idle timer, DND or breaktimer. The shell
+not get locked or interrupted by the idle timer or DND. The shell
 polls every five seconds for a `gamescope` process, a running Steam binary, or
 the DuckStation or PCSX2 emulators, and any one is enough:
 
diff --git a/desktop/modules/status/StatusPage.qml b/desktop/modules/status/StatusPage.qml
index 8a21ad5..4741bcc 100644
--- a/desktop/modules/status/StatusPage.qml
+++ b/desktop/modules/status/StatusPage.qml
@@ -37,7 +37,7 @@ Column {
         width: page.width
         mode: "presentation"
         label: "Presentation"
-        description: "Do not disturb, quiet, no screen lock, breaktimer paused."
+        description: "Do not disturb, quiet, no screen lock."
         value: Status.presentation
     }
 
@@ -74,14 +74,4 @@ Column {
     SnoozeRow {
         width: page.width
     }
-
-    Rectangle {
-        width: page.width
-        height: 1
-        color: Qt.alpha(Theme.text, 0.08)
-    }
-
-    BreakRow {
-        width: page.width
-    }
 }
diff --git a/desktop/modules/status/StatusTile.qml b/desktop/modules/status/StatusTile.qml
index cec18b6..ab3a7af 100644
--- a/desktop/modules/status/StatusTile.qml
+++ b/desktop/modules/status/StatusTile.qml
@@ -17,15 +17,8 @@ Text {
     elide: Text.ElideRight
     font { family: Theme.fontFamily; pixelSize: Theme.fontSize - 4 }
     color: Status.activeCount > 0 ? Theme.text : Theme.subtext
-    // Breaktimer sits below every mode, so an active mode still owns the line
-    // and breaktimer replaces only the idle "All clear". A stopped daemon
-    // falls through to it, which is true: nothing is being tracked.
     text: Status.presentation ? "Presenting"
         : Status.dnd ? "Do not disturb"
         : Status.nolock ? "No lock"
-        : !Status.btRunning ? "All clear"
-        : Status.btPaused ? "Paused"
-        : (Status.btPhase === "breaking" || Status.btPhase === "longbreak")
-            ? "Back in " + Status.btCountdown()
-            : "Break in " + Status.btCountdown()
+        : "All clear"
 }