| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Tagging changes the notmuch index at once, but the mail store only hears
about it on the next sync, and nothing said so. Quitting with tagging
outstanding was silent. Items 18 and 19 of the usability backlog, built
together because the second needs the first's counter.
The counter cannot be QUndoStack::isClean(), which is the obvious
candidate and the wrong one: the undo stack is cleared on every query,
since its entries refer to rows the new result set discards. Tag a
thread, run any query, and the stack is empty while the change is still
unsynced. m_pendingEdits is its own count, incremented where a write is
CONFIRMED rather than where one is sent, so an optimistic update the
worker later rejects cannot leave the indicator claiming an edit that
never landed. Only a successful sync resets it: clearing on failure would
assert the changes had reached the mail store when the sync is exactly
what failed to put them there.
It is shown in the status bar, hidden entirely at zero, and described as
a lower bound rather than a guarantee, since an external notmuch run can
carry changes over without this application noticing.
On exit, sync_on_exit in [general] takes ask, always or never. Three
values rather than a bool because "prompt me", "just do it" and "do
nothing" are three behaviours and true/false expresses two; an unknown
value warns by name, since a typo there silently changes what happens to
unsynced work. The prompt offers three buttons for the same reason: a
user who hit Quit by mistake needs a way back that is not "sync". A sync
started at exit holds the window open until it finishes rather than being
killed mid-run, and a sync that FAILS does not quit, because quitting
there would discard the user's choice silently. With no sync command
configured the prompt degrades to a plain warning instead of offering a
sync that cannot run.
This is not a destructive-action confirmation of the kind CLAUDE.md
forbids. Those cover tag mutations, which keep undo instead of a dialog.
This asks about losing work at the one point where undo cannot help.
The tagsApplied lambda became a named slot, which is better structure and
also what lets a test drive it: the worker is deliberately parentless
because it moves to its own thread, so reaching it with findChild to emit
the real signal cannot work, and contorting the test to try was the wrong
instinct. Testing a modal needed its own care. A test that sends a close
event hangs forever if an unexpected dialog opens, because the modal
spins its own event loop; CloseProbe polls for activeModalWidget, closes
it and records that one appeared, turning "a dialog opened" into an
assertion rather than a hang.
Also removes a stray qDebug left in the open_thread action by the earlier
Enter-key investigation, which had reached two commits.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Opening a thread left it tagged unread, so the unread count never
matched what had actually been read and the app was quietly wrong every
day it was used. Item 6 of the usability backlog.
A single-shot timer, armed when a thread is selected and restarted rather
than stacked, so arrowing down a list marks only the thread still
selected when it fires and not every one passed through. Configurable
through mark_read_delay_ms in [general], defaulting to 2000: zero marks
read at once, and any negative value disables the behaviour, which is why
the value is neither clamped nor warned about at either end.
The automatic change deliberately does NOT go on the undo stack. It
routes through sendThreadTagChange() rather than tagSelected(), because
undoing an action the user never took is worse than leaving a thread
read, and toggle_unread already gives them a direct way back. It still
funnels through the single applyTags path; what differs is only whether
the inverse is pushed, which is a window-level decision above the worker.
An explicit toggle_unread cancels any pending timer, or marking a thread
unread by hand would be reversed a moment later and the key would look
broken.
Two guards beyond the plan, both from asking what happens when a timer
outlives the thread it was armed for. Arming is skipped for a thread that
is not unread, so no write is scheduled that would change nothing, and
the handler re-checks that its thread is still selected and still unread
before writing, so a stale timer does nothing rather than tagging the
wrong thread.
The plan expected the rapid-arrow case to need a database and a manual
check. It needs neither: ThreadListModel takes threads through
appendBatch(), so the case is unit-tested. All three tests were confirmed
to fail against deliberately broken versions, one arming for read threads
and one creating a timer per selection instead of restarting one.
Item 7 is closed in the same pass. The user verified against real mail
that HTML messages already open as HTML, which is what the item asked
for, so it is recorded as done with no code changed. The prefer_html key
it floated was not added: nobody has asked to default to plain text, and
Ctrl+H already switches a thread by hand.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Pressing Return in the query bar moved focus to the thread list and left
the query unrun, so a query typed at the keyboard could not be executed
at all.
Return is bound to open_thread as a Qt::WindowShortcut, and a shortcut is
dispatched before the focused widget ever sees the key. Qt withholds a
plain-LETTER shortcut from an editable widget, which is why every other
binding in the map was safe here, but Return is not a letter and gets no
such protection: the action fired from inside the bar, its handler called
setFocus() on the thread list, and QLineEdit::returnPressed was never
emitted.
Accept the ShortcutOverride for Return and Enter on the query bar, which
tells Qt the focused widget wants the key as ordinary input and stops the
shortcut being dispatched. Narrow by design, one widget and one key, so
open_thread keeps working everywhere else in the window.
Three earlier hypotheses were tested and disproven before this one, and
two synthetic probes wrongly reported the binding as harmless: real input
sends ShortcutOverride first and only dispatches the shortcut if nothing
claims it, while QTest::keyClick skips that round trip entirely. The new
test drives the override exchange rather than the keystroke and fails
against the old code. The comment claiming no filter was needed said the
letter rule covered this case; it did not, and it now says so.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Adds the complete_query action, whose registration the assertion in
registerActions() has been demanding since keymap gained the name: a
known action nothing implements would have been a silently dead binding.
Also lands the QueryCompleter half of the manual trigger, which the
keymap commit left behind: triggerCompletion() and the focus-in filter
gated on completion_on_focus.
Tags refresh at startup, after a sync, and after a mutation introduces a
tag not already known, since that is the tag most likely to be typed
again. onAllTagsReady deliberately drops the generation the signal
carries: a tag list is not an ordered query result, so a later one is
always at least as good as an earlier one and discarding on staleness
could only throw away a good list.
|
|
Resizing the window, the splitter or a thread-list column was undone by
the next launch. State now round-trips through a separate settings file
at ~/.local/state/qtmaildir/uistate.conf, written on close and read at
startup.
The state file is deliberately not the user's config: a base64 geometry
blob does not belong in a hand-edited file, and rewriting that file on
exit would drop its comments and key order, which QSettings does not
preserve.
Two details that are easy to get wrong:
QStandardPaths::StateLocation appends both the organization and the
application name, and both are "qtmaildir" here, so it resolves to
~/.local/state/qtmaildir/qtmaildir. The path is built from
GenericStateLocation instead, matching Config::defaultPath().
Restore runs after buildMenus() rather than at the end of buildUi():
QMainWindow::restoreState() matches toolbars by object name and silently
drops the position of one that does not exist yet.
Every restore is conditional on a non-empty blob, so a missing or
rejected state file leaves the built-in defaults instead of producing a
zero-size window.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Two optional keys in an [account.<key>] stanza. color fills the chip,
label sets its text.
Both belong to the account rather than to [tagcolors] because an account
tag is a different taxonomy: which mailbox a thread arrived in, not what
state it is in.
label is display only. "account-provider-work" is a lot of
row for one bit of information, but the notmuch tag is never renamed, so
existing queries and external tagging are unaffected. Unset falls back to
the account key, and an empty label is ignored rather than rendering a
blank chip.
|
|
Actions were a QHash of std::function dispatched by an event filter,
which nothing could put in a menu. They are QActions now, bound from
KeyMap so a [keys] override reaches the menus as well as the keyboard.
Menu bar covers every action; the toolbar carries only Sync, Archive,
Delete and Undo. Help > Keyboard shortcuts is generated from the actions,
so it shows what the keys really do rather than a copy that drifts.
spam and load_remote gained defaults, having been unreachable without a
hand-written binding.
The event filter is gone. Probing showed QAction shortcuts are dispatched
before the focused widget sees the key, so they beat QAbstractItemView's
type-to-search without one, and Qt already suppresses plain-letter
shortcuts while an editable widget has focus. Dropping the filter's
blanket guard also lets Ctrl+Q work while the query bar has focus.
registeredActionNames() is derived from the actions rather than
hand-maintained, so the two drift tests it needed are replaced by checks
that a configured binding reaches its action.
No confirmation dialogs: tag mutations still answer to undo.
|
|
Confirmed with the maintainer as v2-only rather than v2-or-later. LICENSE is
the official text from gnu.org. Every file under src/ and tests/ carries the
matching notice.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Wires the worker thread, thread list, message pane, sync process and undo
stack together, and replaces the placeholder main() with real startup:
custom URL schemes registered before QApplication, a libnotmuch ABI check,
and config loading.
Four fixes against the drafted version:
- onWorkerError() only set a status label. Its own comment elsewhere
claimed it reverted the optimistic update, and the spec requires that;
it did not, so a rejected write left the list showing a tag the database
never received. The pending change is now recorded and rolled back, and
a confirmed tagsApplied clears it so a later unrelated error cannot undo
a write that succeeded.
- runCurrentQuery() cleared the model but left the undo stack pointing at
rows that no longer exist. Undoing after a new query would have written
to the database while the visible list stayed put. The stack is cleared
with the model.
- m_currentMessages was assigned on every thread load and never read.
Removed.
- buildUi() connected sync output to m_syncLog and errors to m_statusLabel
before either existed. Both are constructed before the wiring now.
cidPrefix generation lives here, this being its only producer in the
application, and is pinned by tests: it must never contain '!' and must be
distinct per message, which are the invariants the cid: namespacing rests
on. A second test holds registeredActionNames() against
KeyMap::knownActions(), since those two hand-maintained lists drifting
either way silently breaks a user's key binding. Mutation-verified that
dropping an action fails the test by name.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
