| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The header and search bar share the wallpaper banner the Alt+F2 runner
uses, each on a plate so it stays legible over any image, and the entry
gets a placeholder. ssh.rasi now carries the @WPAPER@ placeholder, so
install.sh generates it like launcher.rasi instead of linking it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
rofi's ssh mode shows the alias only. blackpearl-sshmenu.sh now reads
~/.ssh/config itself and feeds dmenu two-line cards: the alias, then
"user · address" with the user only where the config sets one. ssh.rasi
lays them out 4x3 under an "SSH:" header lifted out of the inputbar.
The script moves into bin/ under the name hypr-theme's keybinding calls,
and install.sh links it and the theme like the other menus.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The quickshell island replaced both waybar bars and reads the palette
itself, so install.sh no longer runs waybar-theme-udt's installer or
signals a bar that is not running.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The darknix.png symlink out of the profile left the new tab blank, even
after a restart: Firefox's sandbox does not follow it. udt-accent now
copies the wallpaper over the slot on every change instead, removing any
leftover link first so the copy cannot write through it into the
wallpaper. install.sh no longer makes the link.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
FF Ultima selects the new tab image from a fixed list by pref. Its
darknix.png slot is now a link to ~/.cache/udt/wpaper, so selecting it
once in about:config makes the new tab show the current wallpaper, and
Firefox picks up a change without a restart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
udt-keyboard sets an Ajazz AK820 Pro to its "launch" effect in the
current accent through ak820-ctl, and does nothing without it.
udt-accent starts it detached on every run; --watch reapplies the
accent when the USB cable is plugged in, since the keyboard takes no
commands over its dongle or Bluetooth.
The firmware ignores a mode change unless the lights go off first and
settle, so it sends off, waits three seconds, then the mode. A lock
keeps a wallpaper change and a plug-in from interleaving the pairs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The recap was handed to the steps window on every run, so the file always
existed. Any later poke, such as udt-grub or udt-homepage starting from a
login's wallpaper restore, reopened the window on an old summary with
nothing to act on. Keep the tab only when install.sh failed or printed a
command; clear it otherwise.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
btop gets a generated udt.theme and only the color_theme line of btop.conf
is rewritten. Joplin gets userchrome.css overriding the --joplin-* custom
properties most of its UI is built on, with !important since Joplin's own
:root block is injected later; a userchrome.css udt did not write is left
alone. Feishin 1.17 watches a Themes folder for JSON themes, so UDT.json
extends its built-in Catppuccin Mocha with the scheme's roles and reaches
a running Feishin live once selected.
All three use existing roles, so no scheme file changes. udt-appthemes
installs them next to Obsidian and Typora; the recap hint names btop and
Joplin among the apps that need a restart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The appearance panel is the usual way a scheme gets applied, so the hints
install.sh prints belong on screen whoever calls it, not only when the
panel pipes them. install.sh reruns itself as a child, tees the output to
the terminal and a temporary log, and passes the log to udt-steps install,
keeping the child's exit status.
With the window as its main reader, the output is now a summary: only
udt-palette's count line rather than all 86 generated paths, and a restart
hint in place of the closing ls -l dump.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Notification balloons carried the GRUB and homepage root commands, but a
balloon cannot stay open while its commands are pasted into a root shell.
bin/udt-steps NAME writes a consumer's pending steps to
~/.cache/udt/steps/NAME and pokes quickshell's appearance shell, which shows
one tab per file on DP-3. Empty stdin clears the tab, so producers report
on every run and a consumer that caught up drops out by itself.
udt-grub and udt-homepage now route through it. install.sh's SDDM block
checks what is installed and reports only the steps still missing, rather
than printing the full install on every run. udt-homepage remembers the
last staged pair, since udt-accent now also runs on icon switches, which
change neither file and would re-raise the finish steps for nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
GRUB's background is a wallpaper snapshot, but only install.sh rebuilt it,
so a wallpaper change left the /boot copy stale with no hint. udt-grub now
holds the build-and-print logic; install.sh runs it in the foreground and
udt-accent starts it detached next to udt-homepage. A stale installed theme
gets a notification carrying the root copy command. A flock serialises the
two runs install.sh triggers, since build swaps dist/udt in by rename.
AGENTS.md: udt-accent writes seven outputs (SDDM was missing), and names
the two detached helpers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Up to date when the installed theme matches dist/udt, the copy line alone
when GRUB_THEME already names the udt theme, the full three steps otherwise.
The build is deterministic, so a clean diff -rq means nothing changed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The GRUB theme titles its panel with the machine's pretty name, and on
Slackware nothing writes /etc/machine-info: hostnamectl is systemd's. This
sets the one key, keeping any others, and with no argument prints it.
The value is double-quoted with only \ and " escaped, the escapes systemd's
reader and the GRUB build's shlex agree on; control characters are refused.
It needs root and is never run by install.sh, which only suggests it in the
GRUB output while no name is set. tests/machine-name.sh checks the quoting
round-trip against shlex.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
theme.txt has no include, so udt-palette substitutes eight roles and the
scheme name into the sibling repo's theme.txt.in, conky-style. The accent is
the scheme's fixed one; nothing at boot can read the wallpaper.
install.sh runs that repo's build as the user and, only when it succeeds,
prints the root copy into /boot/grub/themes plus the one-time GRUB_THEME and
grub-mkconfig steps. External targets are now skipped whenever their template
is missing, not only when the repo is, so a sibling mid-setup cannot break an
install.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The rofi menus' launch scripts lived loose in ~/bin, so the themes were
tracked and the only things that open them were not. They now live in bin/
and are symlinked under the names hypr-theme's keybindings call.
neovim gets a generated colorscheme: catppuccin/nvim with all 26 palette
colours overridden from the active scheme, selected by rewriting only the
colorscheme line of init.vim. hypr-theme is linked as the whole of
~/.config/hypr, leaving a real directory there alone.
The qt-gtk templates were reference copies nothing installed. They now hold
theme keys only and ini_merge writes them into the live qt5ct, qt6ct and
gtk3 files key by key, keeping every other line; tests/ini-merge.sh checks
it. The stale kvantum.kvconfig template is gone, install.sh writes that file.
Fresh-machine fixes: settings.ini and ~/.config/gtk-4.0 are created when
missing instead of aborting under set -e, and conky is found as a sibling
checkout and skipped when absent, in udt-palette as well as install.sh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The screenshot menu (Mod+Shift+S) borrowed menu.rasi, a small list
box, so its two options were small glyphs in a narrow column.
screenshot.rasi gives each option half the monitor on the scrim,
centred vertically by spacers because rofi sizes a row by its text.
rofi cannot size a font by percentage, so the calling script passes
the glyph size with -theme-str, derived from the focused monitor and
aware of rotated outputs; the size in the theme is only a fallback.
install.sh links the new file with the other layouts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
kcalc rendered white under the dark Kvantum theme. Off Plasma,
KStyleManager forces Breeze unless kdeglobals names a widgetStyle, and
KColorSchemeManager applies BreezeLight unless kdeglobals names a colour
scheme; qt6ct never forwards the portal's prefer-dark to Qt.
Generate a udt.colors KColorScheme from the Kvantum roles, install it to
~/.local/share/color-schemes/, and point kdeglobals at it and at
kvantum-dark.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
bin/udt-homepage replaces install.sh's inline scp. It stages custom.css
and the current wallpaper, keeping the wallpaper's own extension, then
raises a desktop notification with the root commands that install both
and point settings.yaml at the new background. Plain root commands, not
sudo: the login user on that host has no sudo rights.
udt-accent starts it detached on every run, so it follows a wallpaper
change (wallp) as well as a scheme switch (install.sh) without holding
either up when the host is unreachable.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
~/.config/kitty/current-theme.conf is now a symlink into the kitty-conf
repo. install -Dm644 unlinked it and left a plain file in its place, so
the theme is written through the link with cat instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
udt-palette renders the scheme-level palette to
templates/hyprlock/hyprlock-palette.conf ($panel, $input_bg, $text,
$subtext, $fail); udt-accent writes the wallpaper accent gradient to
~/.cache/udt/hyprlock-border.conf as a hyprlang variable. The hyprlock
config sources both, so a scheme switch recolours the lock and a
wallpaper change recolours its border.
install.sh copies the palette and seeds the border from the committed
fallback on a fresh cache. Both selftests cover the new outputs.
|
|
|
|
bin/ holds the weather fetch script that conky.text runs on an execi, so
it needs the same symlink treatment as lib/ and widgets/.
The restart now goes through hyprctl with `[workspace special:dash
silent]`. The dashboard's window rule puts it on that workspace but
cannot suppress the switch to it, so before this every reinstall threw
the dashboard up over whatever was on screen. Guarded by a check for a
running Hyprland, falling back to a plain exec elsewhere, since the
workspace rule is the only reason hyprctl is involved.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
The restart ran a bare `conky -d` and relied on conky's default lookup
finding ~/.config/conky/conky.conf. It does resolve to the same file,
so this changes nothing today.
It is worth pinning anyway: the dashboard's own hypr/README.md tells
the user to launch it from autostart.lua as
`conky -c ~/.config/conky/conky.conf`, and two launch paths that
disagree in form are how they later drift apart in effect.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
The Lua dashboard lives in conky-theme-udt now, so udt-palette renders
that repo's conky.conf.in instead of a local template and install.sh
links the Lua alongside the config.
gen_conky also substitutes critical, for the dashboard's error overlay:
conky reports a Lua fault as a blank window, so the dashboard catches
it and draws the message instead.
The old variables-and-execi template is deleted. Its hardware discovery
was not lost; the hwmon glob-by-name approach is carried into
lib/data.lua deliberately, since fixed indices drift across kernel
reorders.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
One fixed name for every scheme, like Kvantum: the name is referenced by
gsettings and by the GTK4 symlink, so a per-scheme name would mean rewriting
both on every switch and leaving stale themes behind.
Only the two GTK directories are installed. The upstream theme this derives
from also ships cinnamon, gnome-shell, metacity, xfwm4 and plank directories,
none of which anything here reads.
gtk-dark.css is written alongside gtk.css because apps request one or the
other depending on the prefer-dark setting; upstream ships them identical.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
They lived in ~/.cache/wal because pywal owned that directory and udt-accent
was written alongside a pywal run. Nothing on this desktop invokes pywal any
more: the wal binary is unused, and udt-accent imports pywal.backends.colorz
as a quantisation library, which writes nothing. Sharing the cache only left
the ownership ambiguous.
colors.json is the one file that cannot move. pywalfox hardcodes
<cache>/wal/colors.json and honours only XDG_CACHE_HOME, which would relocate
every cache on the system, so udt-accent writes the real file to ~/.cache/udt
and install.sh symlinks the old path at it. ~/.cache/wal now holds that link
and nothing else.
Consumers repointed here: install.sh, udt-accent, launcher.rasi's @WPAPER@.
Outside the repo, wallp, Hyprland's look_and_feel.lua and quickshell's
shared/Theme.qml move with it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
install.sh generated templates/conky.conf and restarted conky, but no
line ever put the file where conky reads it. git log -S"config/conky"
finds nothing, so the install step never existed: ~/.config/conky/conky.conf
was a hand-placed copy that happened to match while the scheme was
macchiato, and silently desynced when it changed.
The restart then made it worse than doing nothing, relaunching conky onto
a stale config on every install.
Symlinked, like everything else the repo owns, and placed before the
restart because conky reads its config once at startup. Safe to link
wholesale: the host-specific parts, the mpd host and the tuned ${goto}
offsets in conky.text, live in conky.conf.in, so only the colours differ
between schemes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
dunst no longer runs on this desktop. notifyd owns
org.freedesktop.Notifications and the quickshell notifications shell
draws the balloons, reading the palette from ~/.cache/wal/udt-palette.qml
like every other quickshell component. So the whole dunst path was
generating a config nothing read.
It was also actively wrong. pywal rendered ~/.cache/wal/dunstrc from the
installed template, then wal.sh restarted dunst on it while @ACCENT@ was
still an unsubstituted placeholder, and udt-accent restarted it a second
time after substituting. Two restarts per wallpaper change, the first on
a broken config, for a daemon that could not claim the bus name anyway.
Removes gen_dunst and its TARGETS entry, write_dunst and DUNSTRC, the
install block, templates/dunstrc.in and the gitignore entry. The reload
table now lists quickshell, which needs no signal: it watches the
generated palette and re-reads it in place.
The [state] roles stay. They were never dunst-only; waybar module states
and conky warnings use the same four.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
The palette reaches the bar as three generated files, not one: the stylesheet,
dots.colors for the two dot scripts, which are bash and cannot read
@define-color, and two tints of the Slackware mark, which has to contrast with
the accent pill at rest and the dark pill on hover.
Copying only the stylesheet meant a scheme switch recoloured every pill and
left the dots and the mark on the previous scheme. Generating the other two
here would have put a second writer on files the bar's own install.sh already
writes, drifting apart the moment either side was edited. So this calls that
script rather than reimplementing it, with UDT_PALETTE_DONE=1 so it skips the
palette run this one has just done.
Never fatal, like udt-appthemes: a failure there warns and leaves the bar on
its old colours rather than stopping kitty, Kvantum and Sublime from being
themed.
Verified by switching tokyo-night to nord and back with only this script: the
accent, DOT_SUCCESS and both mark tints followed in each direction.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
The bar these roles existed for is gone. The stock one alternated module
backgrounds so it read as stripes, and carried a role for each: workspaces,
temperature, memory, cpu, time, date, tray, volume, backlight, battery, plus
charging. waybar-theme-udt draws every pill on main_bg, and its stylesheets
reference seven names in total, none of them a module. So all eleven had no
consumer left in any of the nine schemes.
They are deleted rather than renamed. Renaming them after the new bar's
modules would have invented consumers that do not exist: nothing reads a
"mail" or "launcher" colour, because the pills are deliberately uniform.
Re-adding one means a stylesheet that actually references it.
install.sh was still writing the theme into ~/.config/waybar/, which hyprland
no longer launches, so switching scheme recoloured a bar nobody sees while the
running one kept its old palette. It writes to ~/.config/waybar-udt/ now,
under the fixed name that bar imports, so there is no import to repoint.
The stock directory is left exactly as it was, and deliberately gets no new
theme: its stylesheets still ask for the per-module names, so writing one
there would leave it referencing colours that no longer exist.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Two outputs, not one. The colour scheme themes the editor pane and tracks
the wallpaper accent; the theme themes the UI chrome and sits on the
scheme's fixed accent, because Sublime reads a theme once per window and a
moving accent would leave open windows disagreeing with new ones.
The colour scheme costs no new roles. Its scopes map onto the sixteen ANSI
slots every scheme already declares, so all nine satisfy it and the
identical-role-set selftest passes untouched.
The theme is an override layered over Material Behave rather than a theme
of its own: that theme hardcodes 419 rules of [r,g,b] literals with no
variables, so the chrome surfaces are restated and its geometry, icons and
animations are inherited. It installs under the name of the theme it
overrides, because Sublime merges .sublime-theme files by filename with
Packages/User last; under its own name it would never apply. It also has
to follow Material Behave's material_theme_contrast_mode block and carry
no settings gate, or contrast mode wins.
The accent is replaced by matching the variable's current value rather
than a placeholder: install.sh copies the file out of the repo, so after
the first wallpaper change there is no placeholder left to substitute.
udt-accent --selftest now covers that it stays idempotent.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
templates/dunstrc was generated and then went nowhere. dunst reads
~/.cache/wal/dunstrc, which pywal renders from its own template
directory, and install.sh never wrote to either. The generated config
was therefore dead, and the live one was a hand-maintained copy under
~/.config/wal/templates that this repo did not own, contradicting what
AGENTS.md already claimed about dunst being a consumer.
install.sh now copies the generated config into both places: the pywal
template, so a later `wal` run keeps it, and the cache file, so the
install reaches dunst immediately. Both retain @ACCENT@, which
udt-accent substitutes in the step just below.
Also bump the notification font from Noto Sans 11 to 12 for
readability. Width stays at 300, so longer bodies wrap sooner rather
than overflowing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LvSnbnNgdZS7YAqioCJhpT
|
|
Both expose a first-class, update-safe theming hook, which is what separates
them from the Electron apps that cannot be consumers: Signal, Discord and
Spotify ship closed bundles whose only theming route is patching a signed
asar that every update reverts.
Obsidian gets a CSS snippet rather than a theme, so it layers over whatever
theme a vault already uses instead of replacing the user's choice. Enabling it
means appending to enabledCssSnippets in each vault's appearance.json, which
bin/udt-appthemes does by reading the list and adding to it: rewriting the file
would have switched off the layout snippet one vault was already using.
Typora's theme is derived from the Dracula theme installed here, whose 350
rules all resolve through :root variables, so only that block is templated and
none of the layout is touched.
Verified across six vaults, nested ones included: the vault with an existing
snippet kept it, a vault with no appearance.json got a valid one, and three
consecutive installs leave exactly one udt entry.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015gbjA2bmswN8jyPDKzrvqe
|
|
Qt and GTK were the one part of the desktop the palette never reached: Kvantum
was pinned to a hand-installed catppuccin-macchiato-lavender directory, so
pcmanfm-qt and every other Qt app stayed Macchiato no matter which scheme was
selected.
A Kvantum theme is a .kvconfig of colours and a .svg of widget artwork with
colours baked into the paths, which looked like it needed redrawing. It did
not: the SVG carries only 27 distinct colours, 12 of them palette colours and
the rest neutral greys that are shading, not theme colour. Both files are now
templates with the 12 as placeholders, derived from the theme this desktop was
already running.
Installs to ~/.config/Kvantum/udt/ under one fixed name for every scheme, so a
switch needs no change to kvantum.kvconfig and leaves no stale theme behind.
Adds accent_dim and accent_bright roles for Kvantum's hover and pressed states.
Verified: no placeholders survive generation, the SVG still parses as XML, and
pcmanfm-qt picks up the new colours on restart. Qt reads a theme at startup
only, so running apps need restarting; AGENTS.md says so.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015gbjA2bmswN8jyPDKzrvqe
|
|
install.sh wrote every config and reloaded nothing, so a scheme switch looked
half-applied: the files were correct but waybar, kitty, conky and dunst kept
drawing the old colours until five commands were run by hand.
It now signals waybar, kitty and Hyprland, runs udt-accent (which regenerates
the accent and restarts dunst), and restarts conky, which has no hot-reload.
Each is guarded on the process actually running, so a missing one is skipped
rather than started: verified conky stays stopped when it was not up before.
rofi needs nothing, it reads its theme per launch. Qt and GTK apps still need
a manual restart and the README says so.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015gbjA2bmswN8jyPDKzrvqe
|
|
The dashboard's custom.css was written by hand against Macchiato, so it would
have drifted the moment the desktop changed scheme. It is now generated from
the same roles as everything else and staged on the host by install.sh.
Adds four intermediate grey roles to every scheme. homepage wants a full
ten-step ramp where the other consumers want three depths, and without them
several steps collapsed onto the same colour, flattening the mid-tones.
The scp is deliberately soft: five second timeout, BatchMode, a warning rather
than a failure when the host is unreachable, so a laptop away from that network
still installs the local theme. It stages to ~/hp-stage only, because
/opt/homepage/config is root-owned; install.sh prints the sudo copy to finish.
Verified: the generated Macchiato stylesheet reproduces the deployed one
colour-for-colour, switching to tokyo-night propagates through to the staged
file, and a failing scp leaves install.sh exiting 0.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015gbjA2bmswN8jyPDKzrvqe
|
|
The selector was tracked at palette/roles.conf, which made switching scheme a
committable change: the previous commit carried `scheme = tokyo-night` in its
diff purely because that was the theme running at the time.
Which theme a machine runs is local state, not a property of the project, so
the live file is now ~/.config/udt/roles.conf. install.sh seeds it from
palette/roles.conf.default on a first run and never overwrites it, so a
switch leaves the working tree clean and two machines sharing this repo can
run different schemes. udt-palette falls back to the seed when no live file
exists, so a bare checkout still generates.
This is the one exception to the repo holding the canonical copy of
everything, and AGENTS.md says so.
Verified: seeding on a missing file, the seed not overwriting an existing
choice, generation from the seed alone, and both selftests.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015gbjA2bmswN8jyPDKzrvqe
|
|
Colours were written down five times: rofi's palette.rasi, the waybar theme,
the kitty theme, the conky and dunst templates, and a MACCHIATO dict inside
udt-accent. Changing scheme meant finding all five, and they had already
drifted: the active waybar theme was Macchiato while theme.css next to it was
Mocha, and nothing imported the latter.
Now a scheme is two files. palette/<scheme>.conf holds the colours under the
scheme's own names, and palette/roles-<scheme>.conf says what each is for.
palette/roles.conf is one `scheme =` line selecting the pair. bin/udt-palette
renders that into each consumer's syntax and install.sh runs it first.
The role map is per-scheme rather than shared because the palettes are
genuinely different shapes: Nord has no `base`, Dracula no `surface0`, and
forcing Catppuccin's names onto them would have meant either renaming their
colours or inventing values. A role names a palette colour with two optional
modifiers, `name/75` for alpha and `name*50` for brightness. The second exists
because GTK's shade() has no palette name to point at.
Ships macchiato, tokyo-night, nord and dracula. --selftest resolves every role
in every scheme and asserts they define the same set, so a scheme that cannot
satisfy a consumer fails at install rather than when someone switches to it.
Verified against the live configs: all 46 waybar colours resolve identically to
the previously active theme including its alpha() and shade() derivations, the
kitty theme is colour-for-colour identical, and the rofi palette has the same
26 values. Generated files are gitignored; switching scheme and switching back
reproduces the originals.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015gbjA2bmswN8jyPDKzrvqe
|
|
The yes/no gate in front of shutdown was still on the old adi1090x theme, so
every shutdown showed a Macchiato power menu followed by a dialog that did not
match it.
Its glyphs now come from the theme's own Nerd Font rather than `feather`. That
meant changing the codepoints the script sends, since the originals were
Private Use Area points that only feather carries: they are now the Material
circled check and close (U+F05E0, U+F0159), which Inconsolata Nerd Font Mono
contains. Sized 42 to match the power menu, since the Material glyphs carry a
lot of internal padding and render small.
Worth knowing for future glyph choices: ClearlyU is installed and claims large
parts of the Private Use Area, so it can win fontconfig's fallback and draw a
blank where another font actually has the glyph. The U+F0xxx Nerd Font ranges
avoid that.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G6aeE37K4GHBsaM51yLTTq
|
|
Sizing the widget with an explicit width and height collapsed it, so nothing
was drawn. The original type-4 theme sized it with a horizontal margin instead,
letting the widget expand to the window and squeezing it back to a square, so
do that.
The margin is computed with calc() from 50% rather than the original's
hardcoded 710px, which assumed one screen width and would sit off-center on a
second monitor.
The tilde path was never the problem: rofi does expand it inside a url().
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G6aeE37K4GHBsaM51yLTTq
|
|
Three regressions from collapsing five theme systems into three layouts.
The layouts hardcoded `children`, which silently dropped any -mesg a script
passed. rofipass lost its keybinding cheatsheet and the power menu lost its
uptime line. list.rasi now lists the message widget; rofi hides it when there
is no message, so it costs nothing when unused.
The power menu was never a small menu. It is a deliberate fullscreen prompt
with a greeting, an avatar and one row of four large glyphs, and menu.rasi
flattened all of it. It gets its own layout, the one place where a prompt earns
its keep. The glyphs are drawn in Inconsolata Nerd Font Mono, which was
verified to contain all four; the old theme asked for `feather`, which contains
none of them and was relying on fallback.
The emoji picker is a dense grid of glyphs, not a list, and wasted most of a
single-column window. It gets grid.rasi, sized near the launcher's icons.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G6aeE37K4GHBsaM51yLTTq
|
|
Matches the launcher position already in use (north-anchored, 600px, single
column) rather than the centered grid, and restores the wallpaper banner behind
the input area from the old darknix theme.
The wallpaper path cannot be committed: rofi does not expand a tilde inside a
url(), and an absolute path would bake in a home directory. So launcher.rasi
carries a placeholder and the installer generates the real file. The entry sits
on a solid plate so it stays legible over a bright wallpaper.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G6aeE37K4GHBsaM51yLTTq
|
|
Installs by symlink so the repo stays canonical and the working config cannot
drift from it. accent.rasi is the exception: it points at the generated file in
the wal cache, seeded with the committed placeholder on a fresh install.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G6aeE37K4GHBsaM51yLTTq
|
