| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Typing replaces a Field's value binding, so Discard left the typed text
showing over the reverted draft, and a rejected timeout kept displaying.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Edits notifyd's config.json as a draft behind the SaveBar and runs
notifyctl reload after the write; a stopped daemon is reported as saved
but not applied, since it reads the file at its next start. Muting offers
the apps already seen in the queue and history.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The thumbnail list scrolled a fraction of a thumbnail per wheel notch,
which is ListView's default step and slow with rows this tall. A
MouseArea over the list (acceptedButtons: Qt.NoButton, so clicks and
hovers still reach the thumbnails) now moves one row per notch, and
keeps a touchpad's pixel delta as it is.
An open folder with many images scrolled its header out of view, so
folding it meant scrolling back to the top. A copy of the header is now
pinned over the list while the topmost row belongs to a folder whose own
header has scrolled off; clicking it folds that folder and positions the
view at its header. The header row became an inline component so the
list and the pinned copy draw the same thing.
Loads clean; not yet confirmed by eye.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
qtmaildir now takes --account, --thread and --message, and hands them to
a running window over its socket, so the drawer and the notifications can
open the exact thing they show instead of just launching the client.
mail-open.sh is the one place that turns an account and a thread into
selectors, shared by both callers. It looks up the thread's newest unread
message at click time rather than when the row or notification was built:
by then it may have been read, and an empty lookup falls back to the whole
thread instead of a miss in qtmaildir's status bar.
The notification never had a working click: dunstify is not installed, so
mail-notify.sh always took its notify-send fallback, which carried no
action. It now uses notify-send -A NAME=Text, one action per listed thread
(keyed by thread id, which is hex and so never holds the "=" separator)
plus the account as default. The round trip through notifyd was checked:
notifyctl action makes notify-send print the picked name.
On the page, the account header opens the account and a thread row its
newest unread message. Rows use TapHandler and HoverHandler because a
MouseArea cannot fill a Column. Launches are detached: a first launch is
the client itself, and the old reused Process would have killed it on the
next click. Opening anything now closes the drawer rather than going back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The page shows a summary; btop is the full picture when the summary is
not enough. The button sits in the header's actions slot, so it stays
put while the panel scrolls, and closes the drawer on launch since the
terminal takes over from there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The repository had no name of its own, only the framework's. It is now
Keystone, in the README, AGENTS.md, the settings window, notes commit
messages, calctl's PRODID and the user page's User-Agent.
Its files move off quickshell's name too:
~/.config/quickshell/greetings -> ~/.config/keystone/
~/.config/quickshell/obs-scene-icons.json -> ~/.config/keystone/
$XDG_STATE_HOME/quickshell/desktop.json -> $XDG_STATE_HOME/keystone/
~/.config/quickshell is Quickshell's own default config directory (a
bare qs loads its shell.qml), so sharing it was a collision rather than
a home. There is no fallback to the old paths: the files are moved once.
The layer namespaces become keystone-*, and the Hyprland blur rules in
hypr-theme are renamed to match in the same change. A running shell
keeps its old namespaces until restarted.
Left alone: the retired standalone mail and vm shells' namespaces,
which their READMEs keep as history; Quickshell's own app id, binary
and process name; and the repository directory.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
|
|
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Per-core load, the network rate, VRAM and the fan used to run only while
a PerfPanel existed, and closing the page cleared them. Opening the
drawer therefore always showed a fresh first sample and an empty network
graph, which made the page not very useful as a glance at what just
happened. Everything now samples for the whole session, so the graph
opens on the last minute of history.
The cost is the VRAM fdinfo scan, ~14ms every 2s, now unconditional; a
ponytail note beside it says to gate it on the panel again if that shows
up. The LAN address and the public IP check run once at startup instead
of on each page open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The Mail, Assistant and Ask presets pages got a Save and Discard pair in
the page header; the rest still had their own buttons wherever their
page put them: User's Save at the bottom, Wallpaper's Apply and Reset
beside the mock screens, Icons' Apply and Reset under the cursor cards,
HyprSunset's and HyprIdle's Save + Restart in the page. They now all sit
in the header SaveBar, which takes the page's own verbs (Apply and
Reset, Save + Restart) and a busy state.
HyprSunset and HyprIdle had no notion of an unsaved change, so their
button was always live. They now count as changed when what save()
would write differs from what was read, which enables Save only then,
gives Discard (a reload) something to drop, and marks them in the
sidebar; a window open no longer reloads them over unsaved edits. The
staged cursor moved from IconsTab into the Icons singleton so the
header and the sidebar can see it.
Git and autostart act a row at a time, and a theme applies on click, so
those have no bar.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The qtmaildir, Assistant and Ask presets pages wrote a field on Enter,
and a switch or chip the moment it was clicked, so a half-finished
change reached the file and a slip could not be taken back. They now
edit a draft as fields are typed, and a Save and Discard pair in the
page header (SaveBar, through Page.actions) writes or drops it. Save
waits while a field holds a value that cannot be written, and a draft
over a file that changed on disk meanwhile is refused at Save rather
than written over it. A dot in the sidebar marks a page with unsaved
edits; drafts survive moving between pages. The four Mail pages share
one draft, since they are one file. Tool switches are staged too and
renamed on Save; model Load, Prefer and Restart stay immediate, being
actions rather than settings.
Live editing needed two rules. A field is no longer bound to its value,
which would reset the cursor and eat a typed trailing space; it follows
the value only when the draft moves under it. And a Repeater's model is
now the set of row keys (or a count), assigned only when that set
changes: an array rebuilt from the draft on each keystroke recreates
every row, including the one being typed in, which loses its focus.
Git, autostart's rows, HyprSunset, HyprIdle and User keep their own
buttons.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
QtQuick.Dialogs' ColorDialog opened light on the dark desktop. It paints
from the Qt Quick palette, which qt6ct leaves at Qt's default here: its
custom_palette is off and the dark comes from the kvantum-dark widget
style, which Qt Quick does not use. Qt.labs.platform's ColorDialog falls
back to the widget QColorDialog in a QApplication, which this process
already is for the tray menus, and widgets take the kvantum style like
every other application.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
An account's chip colour and each tag colour were #rrggbb typed by
hand. A swatch beside each now shows the colour and opens Qt's own
ColorDialog, which writes the choice back as #rrggbb; typing still
works. The add-tag row has one too, filling its field. Setting.qml
gains a colour flag rather than a second component, since a colour
key is an ordinary text key with a swatch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
qtmaildir is configured through qtmaildir.conf alone, which it reads at
startup and never writes. Four settings pages under a new Mail group
edit it: Mail ([general], [sync], [completion]), Compose, Accounts (a
card per account, add and remove) and Tags & shortcuts ([tagcolors] and
[keys]). Fields save on Enter and unset when emptied, with qtmaildir's
defaults as placeholders and numbers range-checked; the pages say when
qtmaildir is running and a change waits for its restart.
Ini.js edits the file line by line so its comments survive. Headers are
only whole [name] lines: a section is never cut at the next "[", since
values such as [Gmail]/Bozze hold brackets, the trap AGENTS.md records.
The shortcut actions are copied from qtmaildir's KeyMap::knownActions()
rather than exported by it, since a CLI flag there would have meant
translations and a changelog entry; the field also takes free text, and
the copy is marked as a ponytail ceiling.
The settings sidebar now clips, which a list long enough to scroll
showed it did not: entries drew over the search box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Load set the preference as well as swapping the model in, so loading a
model from the settings page for any reason made it the assistant's
model too: after loading Qwen there, the canvas kept Qwen instead of
bringing the preferred Gemma back. Load and Prefer are now separate
buttons: Load swaps a model in now and leaves the preference alone, and
Prefer only records which model the canvas loads when it opens.
The canvas header also showed a stale model name after a swap; it now
takes the model from the daemon's ctx event, which carries it from
desktop-assistant f9d4644 on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
A preferred model that only took effect from the settings page did
nothing the next time another client had swapped it out. On this
desktop one model and one client run at a time, so opening the canvas
is when the assistant's model should come back: if the preferred one is
neither loaded nor loading, it is loaded, and the canvas header says so
until the router reports it in. The daemon still never asks for a model;
with no preference set nothing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The daemon answers with whichever model llama-server has loaded and
never asks for one, so it never evicts a model another client is using.
The Assistant settings page now lists the router's models with their
state. Load saves one as the preferred model, in Prefs, and asks the
router to load it now, polling /v1/models until it reports loaded;
Prefer marks the loaded model as preferred without swapping. The swap
happens only on that click, so the daemon's rule holds.
AGENTS.md records the router's load endpoint and its two refusals, both
measured: it lives on the server root, not under /v1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Ten pages in one flat list had stopped reading as a list. A module now
names its group, and the sidebar sorts by it and draws a small heading
where it changes: Account (user, git), Appearance (wallpaper, theme,
icons), Desktop (HyprSunset, HyprIdle, autostart) and Assistant (the
daemon, Ask presets). Groups keep the order their first page is
declared in, so shell.qml's module order still decides.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Two settings pages for desktop-assistant.
Assistant edits the daemon's config.toml: server, temperature, tool
rounds, thinking, the system prompt, and the [env] values its tools
read; a switch per tool renames tools/<name>.toml to .toml.off, which
the daemon's glob skips. The daemon reads all of it at startup only, so
the page says when a change is pending and Restart runs assistant.sh
restart, showing its status when the daemon does not come back.
The file is edited line by line, like autostart.lua, so the comments
the example ships with survive: unset keys stay commented out in place.
Every write parses the whole new file with tomllib first and replaces
the old one atomically, so no edit can leave a config the daemon will
not start with. Defaults are read from assistant.py --defaults rather
than copied into QML.
Ask presets edits the canvas's canned questions, which Prefs already
stored for exactly this page: label, question, and the kinds each is
offered for. They apply live.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Moving the appearance files into the desktop added import "../.." after
the last line of each file that began with "import". In Icons.qml that
line is inside the embedded Python cursor script, so the import landed
there: python3 died on a SyntaxError, printed nothing, and every cursor
card stayed empty with nothing in the log. Icons.qml uses no Theme, so
the line goes. Every other moved file has it above its root object.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The mock screens took a third of the width beside the list, which left
both cramped in the settings window. They now sit on top, sized to half
the width and capped so the upright screen stays under 200px, with the
notes and the actions beside them; the folder list takes the full width
and the rest of the height below. The actions are a Flow, so they wrap
instead of clipping in a narrow window.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The drawer's greeting row stays, and clicking it now closes the drawer
and opens the user page in the settings window: Drawer.show already hands
a settings module to the window, so the row's handler is unchanged.
"More git settings" switches the window to the git page through the
same go() it used in the drawer. The page is searchable by the fields it
edits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The labels and page titles only; the module names, and so the IPC verbs
and search keys, stay sunset and idle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The appearance shell existed because a wallpaper picker needed more room
than the 600px drawer, so it ran as its own process with a full-screen
overlay. The settings window now gives it that room, and its five tabs
become five settings pages in the desktop process: Wallpaper, Theme,
Icons & cursor, Sunset and Idle. appearance/ is gone, and with it a
process, a keepalive window and a layer blur rule.
The files move to desktop/modules/appearance/ unchanged in what they do.
Each tab gets a small *Module.qml; the window's refresh-on-open calls the
singletons' refresh(), which the panel's show() used to. The two tabs that
were inline Components in AppearancePanel become ThemeTab and
WallpaperTab, owning the notices the panel printed. Sunset, Idle and
Icons drop their own Flickable so the page scrolls them and search can
reveal a row; the wallpaper list virtualises its rows and scrolls itself,
so it takes the page's new viewHeight instead.
Search finds a colour scheme and an icon or cursor theme by name.
The appearance IPC target moves to desktop/shell.qml with the same verbs,
so udt-steps and any keybind change only the path. Git now follows the
appearance pages and autostart in the sidebar.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Search used to stop at the page: clicking a result opened it at the top
and left the setting to be found by eye. Now each settings module keeps
its rows as searchItems, {text, key}, reread on every window open since
the page itself is not loaded until shown: git runs gitcfg list, and
autostart watches its file. A row hit opens the page, and Page.reveal()
finds the row whose objectName is the key, waiting up to 3s for the
page's own data, scrolls to it and flashes it in the accent. The reveal
lives in Page, so a page only names its rows.
Git's long keyword list was a stand-in for exactly this and is cut to
"gitconfig". The autostart page takes its path from the module now that
both read the file.
Also corrects the AGENTS note on missed hot reloads: it blamed sed -i
replacing the file, but the Edit tool writes a new inode too and usually
reloads. The cause is unknown; the note now says how to detect it and
that a process that stops watching needs a restart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The landing page's tiles repeated the sidebar. It now says what the shell
is and where things live, which is what a landing page is for.
The sidebar gains a search. A page is a Component loaded only when
opened, so its contents cannot be indexed without loading every page;
instead a module lists keywords for the settings buried in its page,
and the search matches those and the label. An entry matched by a
keyword shows which one, Enter opens the first match, Escape clears and
then steps out as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The global git config is set once and left alone, which is what the
settings window is for. The user row and its page stay in the drawer;
"More git settings" there now closes the drawer and opens git in the
window: Drawer.show hands any settings module to the window, so every
deep link, IPC included, lands in the right place.
Git was the only user of Module.up, the page back() returned to, so
up goes with it and back from a drawer page is always the grid.
Also gives autostart its rocket glyph, which the first commit wrote as
an empty string.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The drawer's tiles were turning into a full settings app. The drawer stays
the quick area, live state and things toggled often; pages set once and
left alone go to a settings window, a normal Hyprland toplevel listing
them down the left. A module joins with settings: true, which also drops
its tile. A gear tile and ipc call settings open|toggle reach it.
Autostart edits hypr-theme's autostart.lua directly, line by line: an
hl.exec_cmd line is an entry, behind -- it is disabled, everything else
passes through. Edits refuse when their line moved since the parse, and
writes are atomic because Hyprland reloads on every change.
A wrong entry only shows at the next login, so adding is guided rather
than a free text field: pick an installed app or type a command whose
program must resolve on PATH before Add enables, then a workspace and
silent, composed into a [workspace X silent] rule. Try runs the line
through hyprctl dispatch so the rule applies as at login. Existing rows
get no Try: they ran at login, and a second start stacks an instance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
|
|
Reported from use: a note created with only a title then saved left a db.json
entry with no file beside it, and reopening it said the file was missing.
Cause: FileView.setText("") on a path that view has not loaded creates no
file at all and reports no error. The index write (always non-empty JSON)
was fine, so only the body was lost, which is why it looked like a missing
file rather than a failed save. Bodies are now written by a Process running
cat > <file> with the text on stdin: verified against empty and non-empty
payloads, consecutive writes on one Process, and a store with no db.json at
all. The exit code is the real outcome, so a refused write reports it.
Second report in the same flow: the editor stays editable after the first
click, so typing more and then pressing Commit & push dropped the edit, the
push carrying only what the first click wrote. The second click now writes
the current title and body before it commits and pushes.
|
|
The confirm was on the second click, after the first had already removed the
file and the entry, so the 'Confirm?' label promised a check that had
already happened and one stray click lost the note. The first click now only
arms the button; the second removes and pushes the removal.
|
|
A review of the branch found four ways the page could report success for
work that never happened, all reachable in ordinary use.
Writes: setText is asynchronous unless blockWrites, and its
saved()/saveFailed() do not fire for every write (a second setText to the
same path loses the signal, which stranded the callback), so a save was
reported before it landed and a failed db.json or body write was never
seen. Both views now block and carry the outcome, so writeDb and writeBody
know the result when they return; a failed create therefore leaves no index
entry. The create path also loads the body before the index, so a failed
body write cannot leave an entry with no text.
Commits: the sync chain swallowed every commit failure with '|| true', so a
failing pre-commit hook or a signing failure pushed an unchanged HEAD and
reported success. It now stages, commits only when something is staged, and
lets 'set -e' fail the chain, with stderr folded in for the whole chain
rather than just the push.
Duplicate notes: the 'awaiting commit' state lived only in a 3 second
timer, so a slower second click re-entered create() and appended a second
note. It is now a page property that outlives the timer, and the button
follows it.
Preview: the shared Switch writes checked itself, dropping the binding, so
the switch stopped following page.preview; resynced on change, the way
StatusRow.qml does.
Also validates a note's file name as digits before read, write or rm, and
clears the index error once the index reads again.
|
|
|
|
The editor, and the write and git path behind it. Save is two clicks and
each does one thing: the first writes the note and only then arms the
button as 'Commit & push?', so a quick second click cannot commit a note
the first has not written yet.
The write path refuses when db.json cannot be read as the index. That is
not hypothetical: git pull --rebase --autostash resolves a remote db.json
change against a local uncommitted one, the stash pop conflicts, git still
exits 0, and the file is left full of merge markers. Reading that as 'no
notes' and writing it back deleted every title in a probe; Notes.valid now
distinguishes it from an empty store and the write reports instead. parse
stays tolerant for display. Stamping lastpull also only follows a pull
that worked, and only when git is on at all.
Db reads that a write is based on go through reload() plus waitForJob():
blockLoading does not make reload() blocking, contrary to the note in
AGENTS.md, and reading text() straight after reload() returns the old
contents. A body is written with a plain setText, which needs no prior
load; only reading text() before a load would.
|
|
The module resolves notes.sh's own paths by sourcing its rc, so a changed
BASEDIR moves the page with it, and notes.sh's git test is the same one the
page uses. A Module is a plain QtObject with no default property, so the
config Process and the db.json FileView are typed properties, the shape
UpdatesModule uses for its own Process.
db.json is watched rather than read on open: the tile's count has to move
when a note is added from either side, the CLI included, which is the same
call mail makes for its unread count.
The list reads db.json.notes rather than walking notes/, because that is
where the titles are; entries sort newest first on the file timestamp and
a title search filters them.
|
|
The parsing, sorting and transforms the notes page needs, kept free of any
file or process so node can test them.
Ids and files stay strings: notes.sh writes them with jq --arg and looks a
note up with select(.id == $i), so a number would stop the CLI finding a
note the page wrote. sorted() copies rather than reorders, and an entry
whose file is missing or non-numeric sorts last and formats as blank
instead of NaN.
|
|
desktop-assistant is a text daemon now (its voice version is the tag
voice-v1), and the canvas in desktop/assistant/ is its front end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The single Add line at the bottom took a full section.key and left the
user to type the section right. Each heading now carries a + that opens a
key and value row under it; git config --add writes the key into that
existing section, among its neighbours, rather than at the end of the
file. The typed text lives on the page, not in the fields, so a failed add
keeps it across the reload that rebuilds every row. A new section is made
in the editor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Review findings. With a key holding the same value twice, --fixed-value
--replace-all rewrote both and merged two rows into one, and --unset
failed on both; gitcfg now counts the matches and refuses anything but
exactly one, pointing at the editor. A file git cannot parse made list
print nothing, which the page drew as an empty config; list now prints
git's error as an error= line and the page shows it. Escape in the Add
fields clears the typed text before it leaves the page, as a row's edit
is undone first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
A "More git settings" button under the Git fields. The page emits
moreGit and the module turns it into Page.go("git"), since the page
itself has no reach into the drawer.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
|
|
Every global value as a row under its section, in file order: Enter saves,
Escape undoes, Remove drops that one value, and an Add row takes
section.key and a value. Each write goes through gitcfg and is followed by
a fresh list, so a row shows what git holds; a failure shows git's reason
under its row. "Edit in editor" opens ~/.gitconfig in Sublime Text.
No tile: up is "user", so back returns to the user page it opens from.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
|
|
NUL between entries and the first newline between name and value, so
values holding = or newlines survive. The key is after the last dot, so
color.branch.remote groups under color.branch.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
|
|
list, set, add and unset over git config --global. --fixed-value lets a
write touch one value of a multi-valued key. set and unset check the old
value is still there first: --replace-all with no match appends and exits
0, and the file may have changed in an editor since the page read it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
|
|
The greeting row picks one at random from ~/.config/quickshell/greetings,
one per line with {user} for the login name, # comments and blank lines
skipped; without the file, five built-in ones. The row is rebuilt on every
drawer open, so the file is read then with no watch, and the last pick is
kept in User.js, a shared .pragma library, so the same greeting never
shows twice running.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Up and Down move through the list, wrapping, and light the row as hover
does; Enter takes it; Escape closes the list. With no list open the
keys pass on, so Escape still leaves the page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
There is no place database on this machine, and the user chose
Nominatim over a tz city list for coverage. It is asked 1s after typing
stops (its policy: one request a second, an identifying User-Agent,
nothing personal sent), from three characters, in the desktop's
language, and a reply to an older query is dropped. places() turns its
JSON into 'place, region, country' labels and treats an error page as
no suggestions; test_user.js covers it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The one-line preview became a section: the git name and email as
read-only fields that follow the Name and Email edits as they are
typed, and the signing key, which is git's too, moved under them. A
derived field is computed from the draft and never saved on its own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
