| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A Wayland window capture is chosen in the portal picker, which only OBS's
source dialog can open. In a scene whose only source is a PipeWire capture,
the panel gets a Window button that opens that dialog. A window scene with
more than one source needs a per-scene designation the pill does not have yet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
At rest the pill is a record dot with the elapsed time; a click morphs it
into a panel, as the status pill does for sound, with Record/Stop,
Pause/Resume, Show/Hide webcam and the scene list. The user preferred it
to every control inline: the pill stays small, and scenes are picked by
name rather than stepped through, so obsStep is gone. OBS quitting with
the panel open clears it, or the island would stay held open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Six tasks: logic helpers with their check, the openssl auth helper, the
Obs singleton, the pill, island wiring with the sliver pulse, docs.
Records two deviations from the spec found while planning: QML's
WebSocket hides the close code, so a wrong password is logged as
'closed before Identified'; responses route on the echoed requestType.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
A pill on the island that exists while OBS runs: record, pause, scene,
webcam visibility, and a pulsing sliver while recording. Talks to
obs-websocket directly from QML (QtWebSockets is installed), reading the
password from OBS's own config so no copy exists. Auth stays on because
obs-websocket listens on every interface.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Per-core load, the network rate, VRAM and the fan used to run only while
a PerfPanel existed, and closing the page cleared them. Opening the
drawer therefore always showed a fresh first sample and an empty network
graph, which made the page not very useful as a glance at what just
happened. Everything now samples for the whole session, so the graph
opens on the last minute of history.
The cost is the VRAM fdinfo scan, ~14ms every 2s, now unconditional; a
ponytail note beside it says to gate it on the panel again if that shows
up. The LAN address and the public IP check run once at startup instead
of on each page open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The Mail, Assistant and Ask presets pages got a Save and Discard pair in
the page header; the rest still had their own buttons wherever their
page put them: User's Save at the bottom, Wallpaper's Apply and Reset
beside the mock screens, Icons' Apply and Reset under the cursor cards,
HyprSunset's and HyprIdle's Save + Restart in the page. They now all sit
in the header SaveBar, which takes the page's own verbs (Apply and
Reset, Save + Restart) and a busy state.
HyprSunset and HyprIdle had no notion of an unsaved change, so their
button was always live. They now count as changed when what save()
would write differs from what was read, which enables Save only then,
gives Discard (a reload) something to drop, and marks them in the
sidebar; a window open no longer reloads them over unsaved edits. The
staged cursor moved from IconsTab into the Icons singleton so the
header and the sidebar can see it.
Git and autostart act a row at a time, and a theme applies on click, so
those have no bar.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The qtmaildir, Assistant and Ask presets pages wrote a field on Enter,
and a switch or chip the moment it was clicked, so a half-finished
change reached the file and a slip could not be taken back. They now
edit a draft as fields are typed, and a Save and Discard pair in the
page header (SaveBar, through Page.actions) writes or drops it. Save
waits while a field holds a value that cannot be written, and a draft
over a file that changed on disk meanwhile is refused at Save rather
than written over it. A dot in the sidebar marks a page with unsaved
edits; drafts survive moving between pages. The four Mail pages share
one draft, since they are one file. Tool switches are staged too and
renamed on Save; model Load, Prefer and Restart stay immediate, being
actions rather than settings.
Live editing needed two rules. A field is no longer bound to its value,
which would reset the cursor and eat a typed trailing space; it follows
the value only when the draft moves under it. And a Repeater's model is
now the set of row keys (or a count), assigned only when that set
changes: an array rebuilt from the draft on each keystroke recreates
every row, including the one being typed in, which loses its focus.
Git, autostart's rows, HyprSunset, HyprIdle and User keep their own
buttons.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
QtQuick.Dialogs' ColorDialog opened light on the dark desktop. It paints
from the Qt Quick palette, which qt6ct leaves at Qt's default here: its
custom_palette is off and the dark comes from the kvantum-dark widget
style, which Qt Quick does not use. Qt.labs.platform's ColorDialog falls
back to the widget QColorDialog in a QApplication, which this process
already is for the tray menus, and widgets take the kvantum style like
every other application.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
An account's chip colour and each tag colour were #rrggbb typed by
hand. A swatch beside each now shows the colour and opens Qt's own
ColorDialog, which writes the choice back as #rrggbb; typing still
works. The add-tag row has one too, filling its field. Setting.qml
gains a colour flag rather than a second component, since a colour
key is an ordinary text key with a swatch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
qtmaildir is configured through qtmaildir.conf alone, which it reads at
startup and never writes. Four settings pages under a new Mail group
edit it: Mail ([general], [sync], [completion]), Compose, Accounts (a
card per account, add and remove) and Tags & shortcuts ([tagcolors] and
[keys]). Fields save on Enter and unset when emptied, with qtmaildir's
defaults as placeholders and numbers range-checked; the pages say when
qtmaildir is running and a change waits for its restart.
Ini.js edits the file line by line so its comments survive. Headers are
only whole [name] lines: a section is never cut at the next "[", since
values such as [Gmail]/Bozze hold brackets, the trap AGENTS.md records.
The shortcut actions are copied from qtmaildir's KeyMap::knownActions()
rather than exported by it, since a CLI flag there would have meant
translations and a changelog entry; the field also takes free text, and
the copy is marked as a ponytail ceiling.
The settings sidebar now clips, which a list long enough to scroll
showed it did not: entries drew over the search box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Load set the preference as well as swapping the model in, so loading a
model from the settings page for any reason made it the assistant's
model too: after loading Qwen there, the canvas kept Qwen instead of
bringing the preferred Gemma back. Load and Prefer are now separate
buttons: Load swaps a model in now and leaves the preference alone, and
Prefer only records which model the canvas loads when it opens.
The canvas header also showed a stale model name after a swap; it now
takes the model from the daemon's ctx event, which carries it from
desktop-assistant f9d4644 on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
A preferred model that only took effect from the settings page did
nothing the next time another client had swapped it out. On this
desktop one model and one client run at a time, so opening the canvas
is when the assistant's model should come back: if the preferred one is
neither loaded nor loading, it is loaded, and the canvas header says so
until the router reports it in. The daemon still never asks for a model;
with no preference set nothing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The daemon answers with whichever model llama-server has loaded and
never asks for one, so it never evicts a model another client is using.
The Assistant settings page now lists the router's models with their
state. Load saves one as the preferred model, in Prefs, and asks the
router to load it now, polling /v1/models until it reports loaded;
Prefer marks the loaded model as preferred without swapping. The swap
happens only on that click, so the daemon's rule holds.
AGENTS.md records the router's load endpoint and its two refusals, both
measured: it lives on the server root, not under /v1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Ten pages in one flat list had stopped reading as a list. A module now
names its group, and the sidebar sorts by it and draws a small heading
where it changes: Account (user, git), Appearance (wallpaper, theme,
icons), Desktop (HyprSunset, HyprIdle, autostart) and Assistant (the
daemon, Ask presets). Groups keep the order their first page is
declared in, so shell.qml's module order still decides.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Two settings pages for desktop-assistant.
Assistant edits the daemon's config.toml: server, temperature, tool
rounds, thinking, the system prompt, and the [env] values its tools
read; a switch per tool renames tools/<name>.toml to .toml.off, which
the daemon's glob skips. The daemon reads all of it at startup only, so
the page says when a change is pending and Restart runs assistant.sh
restart, showing its status when the daemon does not come back.
The file is edited line by line, like autostart.lua, so the comments
the example ships with survive: unset keys stay commented out in place.
Every write parses the whole new file with tomllib first and replaces
the old one atomically, so no edit can leave a config the daemon will
not start with. Defaults are read from assistant.py --defaults rather
than copied into QML.
Ask presets edits the canvas's canned questions, which Prefs already
stored for exactly this page: label, question, and the kinds each is
offered for. They apply live.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Moving the appearance files into the desktop added import "../.." after
the last line of each file that began with "import". In Icons.qml that
line is inside the embedded Python cursor script, so the import landed
there: python3 died on a SyntaxError, printed nothing, and every cursor
card stayed empty with nothing in the log. Icons.qml uses no Theme, so
the line goes. Every other moved file has it above its root object.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The mock screens took a third of the width beside the list, which left
both cramped in the settings window. They now sit on top, sized to half
the width and capped so the upright screen stays under 200px, with the
notes and the actions beside them; the folder list takes the full width
and the rest of the height below. The actions are a Flow, so they wrap
instead of clipping in a narrow window.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The drawer's greeting row stays, and clicking it now closes the drawer
and opens the user page in the settings window: Drawer.show already hands
a settings module to the window, so the row's handler is unchanged.
"More git settings" switches the window to the git page through the
same go() it used in the drawer. The page is searchable by the fields it
edits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The grid is for quick settings, and the window it opened is the
opposite, so a tile for it sat wrong. The gear now sits at the right of
the user header, a round button that closes the drawer and opens the
settings window on its landing page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
A window-wide Shortcut rather than a Keys handler, so it works with the
focus in a field, where Escape is taken first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The labels and page titles only; the module names, and so the IPC verbs
and search keys, stay sunset and idle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The appearance shell existed because a wallpaper picker needed more room
than the 600px drawer, so it ran as its own process with a full-screen
overlay. The settings window now gives it that room, and its five tabs
become five settings pages in the desktop process: Wallpaper, Theme,
Icons & cursor, Sunset and Idle. appearance/ is gone, and with it a
process, a keepalive window and a layer blur rule.
The files move to desktop/modules/appearance/ unchanged in what they do.
Each tab gets a small *Module.qml; the window's refresh-on-open calls the
singletons' refresh(), which the panel's show() used to. The two tabs that
were inline Components in AppearancePanel become ThemeTab and
WallpaperTab, owning the notices the panel printed. Sunset, Idle and
Icons drop their own Flickable so the page scrolls them and search can
reveal a row; the wallpaper list virtualises its rows and scrolls itself,
so it takes the page's new viewHeight instead.
Search finds a colour scheme and an icon or cursor theme by name.
The appearance IPC target moves to desktop/shell.qml with the same verbs,
so udt-steps and any keybind change only the path. Git now follows the
appearance pages and autostart in the sidebar.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The About text sat in the top-left corner of an otherwise empty page; it
is now centred both ways in the space beside the sidebar.
The sidebar's edge, the rule between it and the page, drags to resize it
between 160 and 420px, lit in the accent while hovered. The width lives
in Prefs, written once on release rather than on every pixel of the
drag, so it survives a restart without a file to edit by hand.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
A small x at the right of the field while something is typed. Clearing
puts the focus back in the field, ready for the next search. Escape
still clears from the keyboard.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
Search used to stop at the page: clicking a result opened it at the top
and left the setting to be found by eye. Now each settings module keeps
its rows as searchItems, {text, key}, reread on every window open since
the page itself is not loaded until shown: git runs gitcfg list, and
autostart watches its file. A row hit opens the page, and Page.reveal()
finds the row whose objectName is the key, waiting up to 3s for the
page's own data, scrolls to it and flashes it in the accent. The reveal
lives in Page, so a page only names its rows.
Git's long keyword list was a stand-in for exactly this and is cut to
"gitconfig". The autostart page takes its path from the module now that
both read the file.
Also corrects the AGENTS note on missed hot reloads: it blamed sed -i
replacing the file, but the Edit tool writes a new inode too and usually
reloads. The cause is unknown; the note now says how to detect it and
that a process that stops watching needs a restart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The landing page's tiles repeated the sidebar. It now says what the shell
is and where things live, which is what a landing page is for.
The sidebar gains a search. A page is a Component loaded only when
opened, so its contents cannot be indexed without loading every page;
instead a module lists keywords for the settings buried in its page,
and the search matches those and the label. An entry matched by a
keyword shows which one, Enter opens the first match, Escape clears and
then steps out as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The page header's back arrow closed the whole window, which reads wrong
for a back button. The window now opens on a landing page, a tile per
settings page in the drawer's own Tile, and back and Escape step out to
it; Escape there closes the window, as on the drawer's grid. An empty or
unknown name opens it, so the gear tile and ipc toggle land there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
sed -i renames a new file over the old one, and quickshell's watch on the
old file dies with it. The autostart glyph fix went in that way and the
running shell never reloaded: the log showed no reload after the edit, and
a content change to shell.qml brought the glyph up.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The global git config is set once and left alone, which is what the
settings window is for. The user row and its page stay in the drawer;
"More git settings" there now closes the drawer and opens git in the
window: Drawer.show hands any settings module to the window, so every
deep link, IPC included, lands in the right place.
Git was the only user of Module.up, the page back() returned to, so
up goes with it and back from a drawer page is always the grid.
Also gives autostart its rocket glyph, which the first commit wrote as
an empty string.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
The drawer's tiles were turning into a full settings app. The drawer stays
the quick area, live state and things toggled often; pages set once and
left alone go to a settings window, a normal Hyprland toplevel listing
them down the left. A module joins with settings: true, which also drops
its tile. A gear tile and ipc call settings open|toggle reach it.
Autostart edits hypr-theme's autostart.lua directly, line by line: an
hl.exec_cmd line is an entry, behind -- it is disabled, everything else
passes through. Edits refuse when their line moved since the parse, and
writes are atomic because Hyprland reloads on every change.
A wrong entry only shows at the next login, so adding is guided rather
than a free text field: pick an installed app or type a command whose
program must resolve on PATH before Add enables, then a workspace and
silent, composed into a [workspace X silent] rule. Try runs the line
through hyprctl dispatch so the rule applies as at login. Existing rows
get no Try: they ran at login, and a second start stacks an instance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
|
|
