| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Page.qml gains an icon rendered before the title, and the drawer binds
it to the loaded module's icon so a module whose glyph changes (network
follows the active link) keeps the header in step.
|
|
A second action while one was in flight killed the first process, whose
onExited then fired under the new label and raised a false failure
notification. Actions are now queued and launched on exit, so each exit
reports under its own label. Also correct two comments that contradicted
the code: the pairing banner is only noticed on the on-open poll, and the
laptop glyph keys off the daemon's desktop type.
|
|
The tile, page and row each took a required property named mod while the
module object's id is also mod. In a Component scope the id resolves to
the property's own unset self, so every page.mod read was undefined and
the device list never rendered. Only a runtime TypeError showed it; the
smoke check was clean because the drawer was closed.
kc matches the net and bt convention and cannot collide with the id.
|
|
No D-Bus module means shell-outs and no push; the daemon and the
indicator are separate; the battery plugin is not on every device; and
qdbus reads properties and methods through one call shape.
|
|
Records that the phone-to-PC clipboard is the daemon's plugin and not the
indicator's, so removing the indicator does not break it, and that polling
stops when the drawer closes.
|
|
A QtQuick.Dialogs FileDialog held on the module, not the page, so a
closed drawer does not destroy it mid-pick. The path is decoded from the
file:// URL before it reaches kdeconnect-cli.
|
|
Outgoing pair and unpair go through kdeconnect-cli; accepting and
rejecting an incoming request go straight to the daemon, since the CLI
has no verb for them. The verification key is shown on the row while a
pairing is in flight so the two ends can be compared.
An incoming request is not noticed while the drawer is closed, because
the poll only runs when it is open; the daemon keeps the request, so it
is there on the next open.
|
|
Ring, clipboard, mount and unpair, all shell-outs since there is no D-Bus
module. Actions share one serialized Process and a failure notifies, for
the case where the drawer has closed by the time the command returns.
Mount runs --mount and then --get-mount-point in one shell, because
--mount prints nothing and the path is a second call.
|
|
State is polled from kdeconnect-state.sh because there is no D-Bus module
to subscribe with. The poll runs only while the drawer is open: the tile
is created when the panel loads and destroyed when it unloads, and it
flips the module's polling flag.
The laptop reports no battery plugin, so an absent charge is an empty
field and renders as nothing, never as a zero.
|
|
Quickshell 0.3.1 has no generic D-Bus module, so device state comes from
qdbus6 shell-outs. The script emits a tab line protocol for the QML side
and is checked by a stub-daemon test, since the live daemon is not an
oracle an agent can rely on.
A failed daemon query exits non-zero with no output so the module keeps
its last list, which is not the same as a valid empty device list.
|
|
Absorbs the kdeconnect-indicator into the drawer: status, battery,
pairing, ping, clipboard send, file share, refresh and mount. State is
polled from a qdbus6 helper script while the drawer is open, since
quickshell 0.3.1 has no generic D-Bus module.
The spec notes the phone-to-PC clipboard is the daemon's plugin, not the
indicator's, so removing the indicator does not touch it.
|
|
The pairing flow needs isPairRequested, isPairRequestedByPeer and the
verification key, so the polled line carries them; the key is only queried
with a pairing in flight. A failed daemon query is a non-zero exit with no
output, which is how the module tells it apart from a valid empty list.
Pairing failure comes from the kdeconnect-cli exit code, not the
pairingFailed signal, since there is no generic D-Bus module to watch it.
|
|
Status plus basic actions, absorbed from the indicator. State comes from
qdbus6 over kdeconnectd, since quickshell 0.3.1 has no generic DBus module.
Polled while the drawer is open, driven by the tile lifecycle.
Notes the indicator is not what serves the phone-to-PC clipboard, and the
FileDialog focus risk under an Exclusive layer surface.
|
|
Adding desktop/Switch.qml while only editing files under modules/ left it
out of the running shell's generated qmldir, so the two pages that use
Switch could not resolve it and their tiles dropped from the grid. The
code was correct; a fresh process rendered it. The directory's qmldir is
regenerated only when a file that imports the directory reloads.
|
|
|
|
|
|
|
|
Fontconfig falls back per codepoint, so the same codepoint can be a
different glyph in a different Nerd Font: the ethernet codepoint rendered
as a gamepad. The theme now pins the family and the note says to check the
font cmap for a new glyph.
|
|
Glyphs are Nerd Font private-use codepoints, and relying on per-codepoint fontconfig fallback from Noto Sans let the same codepoint resolve to a different glyph in a different Nerd Font.
A Theme.iconFamily now names the render family once, and every glyph Text uses it, while fontFamily stays Noto Sans for words and labels. The ethernet glyph moves from \uf6ff to \uef44, the fa-ethernet codepoint present in Inconsolata.
|
|
|
|
The tile no longer swaps a wired/wifi icon, and the local IP comes from
ip -j because Quickshell.Networking exposes only the MAC. Recorded in the
spec so it matches the code.
|
|
|
|
|
|
The native backends start empty for about two seconds, device lists are
ObjectModels, NMSettings is not in QML scope, and quickshell has no BlueZ
agent. Each one cost a probe to learn; writing them down is cheaper than
re-learning them.
|
|
The Connections block needs a typed property on a QtObject, the bluetooth
README lines belong to Task 6 so every commit stays self-consistent, and
Pairing has no status property. Each was found by a task review and fixed
in the plan as well as the code.
|
|
|
|
Quickshell has no BlueZ agent and no generic D-Bus module, so a pairing
that needs a passkey confirmed cannot be done from QML. bluetoothctl
registers its own agent, so pairing is the one shell-out; adapter state,
scanning, connecting and forgetting all stay native.
The timeout is the ceiling: a device bluetoothctl cannot auto-confirm
fails visibly rather than hanging the page.
|
|
|
|
Native Quickshell.Bluetooth for adapter power, discoverable, scan,
connect, disconnect, trust and forget. Pairing is separate, because
quickshell ships no BlueZ agent.
The adapter is null for the first ~2s, so every access is navigated
safely rather than assuming a first paint.
|
|
|
|
|
|
Radio switch, scan, and a list ordered connected, known, strongest. A
secured unknown network reveals an inline password field rather than
opening a popup, since a QtQuick.Controls popup is a separate window that
positions badly on this layer surface, the same reason the sound page
expands in place.
Connection failures come through the Network.connectionFailed signal and
show inline; the same failure also notifies, for the case where the
drawer has closed by the time it lands.
|
|
Wired first because it is the simpler half and proves the module wiring.
Native Quickshell.Networking, no polling: the singletons push, and
alwaysActive is true with no Service.qml because there is nothing to gate.
The tile shows one line per active link rather than picking a primary,
since the API exposes no route metric and guessing wrong would be worse
than showing both.
|
|
Eight tasks, each leaving the tree working: network wired page, wifi
section, README, bluetooth module and page, pairing, README, then the
waybar removal and the trap notes.
The spec's failure section is corrected in the same commit: it claimed
forget and disconnect failures would surface inline, but neither backend
exposes a failure signal for them, so that is a ceiling rather than a
feature.
Verified by probe before writing any task: the singletons start empty for
about two seconds, the device lists are ObjectModels, signalStrength is
0..1, scanner and discovering are writable, and NMSettings is not in QML
scope, which drops the hidden-network join the spec had left conditional.
|
|
Two drawer modules covering wired, wifi and bluetooth, using the native
Quickshell.Networking and Quickshell.Bluetooth backends rather than nmcli
or bluetoothctl. The one exception is pairing: quickshell ships no BlueZ
agent and no generic D-Bus module, so a device needing passkey
confirmation is paired through bluetoothctl, whose own agent handles it.
The wifi module became Network so a connected eth0 does not mask the wifi
state; the tile shows both links when both are up because the API exposes
no route metric.
Replaces waybar's network and bluetooth indicators, per the drawer being
the single place they are managed.
|
|
The sound page showed the default sink and source but gave no way to
choose another device and the meter was inert. Each section now lists
the real audio devices, streams and monitor nodes filtered out, behind
an in-place dropdown that sets Pipewire.preferredDefaultAudioSink or
preferredDefaultAudioSource. The meter takes the wheel, click and drag,
and the state glyph beside the percentage toggles mute.
The list expands in place rather than in a popup because a
QtQuick.Controls popup is a separate window and does not position
reliably on a layer surface. The meter accepts the wheel and prevents
stealing so the page's ScrollView neither scrolls nor flicks instead.
|
|
|
|
The README claimed a click outside returns to the grid; it closes the
drawer, and only Escape-with-a-page or the back arrow return to the grid.
The three moved module READMEs' run and IPC commands still named the
deleted volume-osd, mail-overview and vm-manager paths, so point them at
qs -p desktop and ipc call drawer open sound|mail|vm.
|
|
Five components become three, and the Theme symlink count with them. Two
new notes: a pragma Singleton in a subdirectory resolves through a plain
directory import with no qmldir, and Virsh.sampling gates only the stats
poll, not the lifecycle stream that keeps the tile correct while the page
is closed.
|
|
Virsh.qml is unchanged; VmPanel's body becomes the page and the stat row
becomes a Flow, because four stats with 150px bars do not fit a 600px
drawer as one row. The page starts and stops Virsh.sampling, so the 2s
poll runs only while something is looking at it; the lifecycle event
stream still runs always, which is what keeps the tile's dots current.
|
|
The singleton was referenced only inside lazy Components, so its
qtmaildir.conf watcher and unread-count refresh did not start until the
drawer first opened, contradicting alwaysActive and the old MailPanel,
which shell.qml instantiated directly. Naming Accounts at the Module top
level creates it at shell load; the page keeps its own refresh on open.
|
|
Accounts.qml is unchanged and MailPanel's body becomes the page. The
three scripts move with it, which changes the absolute paths in autostart
and in the waybar module; both are outside this repo and listed in the
plan's final task. Button.qml, byte-identical here and in vm-manager,
lands at the shell root as the single copy.
|
|
VolumeOsd.qml did three jobs in one file: PipeWire tracking, the OSD
surface and the player transport. They become Service, Osd and the page.
The OSD keeps its namespace so the existing Hyprland blur rule still
matches, and the service stays always-active because the OSD has to
answer a keypress with no drawer open.
|
|
A tile with no page: appearance stays its own process because a wallpaper
picker needs more room than a 600px drawer, so the tile only fires its
existing IPC. This is the case the contract's activate() exists for.
|
|
Quickshell 0.3.1 IPC requires every declared argument, so the plan's
`ipc call drawer open` with no page fails; the page-less grid entry is
the zero-argument `toggle`. Also records that `... | head` races
timeout and kills the shell early, so verification uses a file redirect.
|
|
The page Loader is anchored to its parent, so the x binding on it was
overridden and the slide never rendered. Drive the motion with a
Translate transform instead, which the anchors do not touch. Opacity
and the back-arrow wiring are unchanged.
|
|
Left of DP-1 because conky holds the right; ExclusionMode.Normal so the
bar the drawer is reached from stays visible and clickable. The top is an
empty Item claiming the space the notification engine will fill, so the
grid already sits where it will sit once that lands.
|
|
The page body scrolls because mail with several accounts and vm with
several VMs both exceed the drawer height; the tile grid deliberately
does not, being fixed at a 3x3 ceiling.
|
|
A module provides a tile, a page, both or neither, plus alwaysActive,
which governs the background service rather than the page: the drawer is
closed most of the time and three of four modules have background work.
|
|
The plan claimed a pragma Singleton outside the config root is invisible
until a qmldir names it, and had Task 1 create one plus Tasks 6, 7 and 8
append a line each. That premise was wrong.
Tested: a pragma Singleton in modules/sub/, reached by a plain
import "modules/sub", resolves with no qmldir anywhere. The control was a
reference to a genuinely undefined type, which warns "ReferenceError:
<name> is not defined"; the singleton case produced no such warning and
the binding evaluated. This matches what AGENTS.md already documented
about Theme.qml, which the code review pointed out.
Four registration steps removed and the remaining steps renumbered. The
AGENTS.md note Task 9 adds now records the tested behaviour rather than
the invented one.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01We9zcHEH8ZWHPcQwMaJRNv
|
