| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Every version before item 103 tagged a message `deleted` and left its file
exactly where it was, so deleted mail accumulated in the inboxes with only a
chip to say otherwise. `Find stranded deleted mail` runs the query that finds
it: tagged `deleted`, and not inside any configured trash folder.
It reports and moves nothing. Acting on its own would be a bulk delete with no
selection behind it, and the user asked for something they could come back to
and review. Repeatable rather than a startup migration, for the same reason:
mail reaches this state again whenever another client tags without moving.
A menu entry only, at the user's request, so it cannot be confused with the
Trash filter beside the other four.
Also adds everyActionIsReachableFromAMenu(), which asserts the fifth
registration site nothing enforced. CLAUDE.md documents four places; a menu is
the fifth, and `restore` shipped on this branch reachable by a chord and by
nothing a user could see. The new test found three more of the same:
open_thread, clear_pane and clear_selection were all keyboard-only. All three
now sit in the View menu.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Del is the key a user reaches for and Ctrl+D is not a guess anyone makes.
Both are bound; Del is listed FIRST because that is the one the menus
advertise.
Bare, which is safe here for a reason that does not generalise to other
bare keys. A QAction shortcut is dispatched before the focused widget sees
the key, and Qt withholds only plain LETTERS from editable widgets, so by
the argument that made bare Return break the query bar this should delete
mail while the user edits a query. It does not: QLineEdit accepts the
ShortcutOverride for Delete itself, because Delete is one of its own
editing keys, which Return is not. Measured with and without an explicit
filter, the action fires 0 times either way, so no filter is added.
theDeleteKeyEditsTextInTheQueryBar() pins that Qt behaviour, since the
binding rests on it.
**Two defects surfaced from the second binding, both real.**
An action can now have more than one default, and KeyMap did not allow for
it. sequenceFor() decided "is this a built-in?" by comparing against
defaultSequenceFor(), which returns only the FIRST default, so the second
looked like a user override and won the "a user binding beats the default"
rule. The menus advertised Ctrl+D to a user who had configured nothing, and
sequenceFor() and defaultSequenceFor() disagreed about an untouched action.
isDefaultBinding() asks whether a sequence is ANY of the action's defaults;
when two defaults tie, the one defaultBindings() lists first wins, which is
the author's stated preference rather than an alphabetical accident.
And Restore read each message's origin tag FROM THE MODEL. The model's tags
come from the query, so a row whose delete has not been re-queried still
carries its pre-delete tags: measured `[inbox,unread]` on a message already
sitting in the trash, one run in three. No origin tag was found, the
message took the no-origin branch, and Restore moved it to the INBOX
instead of the folder it came from, silently, with the origin tag left
behind as the only evidence. A restore has to be right about the
destination or it is worse than doing nothing.
The trash-view Restore now resolves its messages against the DATABASE
first, through a new NotmuchWorker::resolveMessages(). That and
resolveThreadMessages() share one walk, resolveQuery(), rather than
growing a near-duplicate: they differ only in whether the terms are `id:`
or `thread:`. restoreSelectedThreads() already worked this way; this is the
same reasoning applied to the message-scoped path.
The flake was found by running one test five times rather than trusting a
single green, and the fix verified the same way: 5 of 5, then the full
suite three times over.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Task 6. Delete moved mail into the trash and the only ways back out were a
second press of Delete or Ctrl+Z, both of which act on a row the user has
to have deleted in this session. Browsing the trash and putting something
back needed an action of its own.
`restore` is enabled from the QUERY, not from the selection's tags. The
trash view is path-based precisely so that mail trashed by another client
appears in it, and such a message carries no tag of ours: deciding from
`tag:deleted` would disable Restore on exactly the messages that most need
it. isShowingTrash() compares the current query against the trash
generator's own, for both the per-account and the all-accounts scope, so it
follows the account dropdown like every other filter.
A message with NO origin tag is the foreign-trashed case, and it is why
this is not simply restoreSelected() under a new name. The two callers want
opposite things from a missing origin, which `fallbackToInbox` selects.
From the trash view the message is demonstrably in the trash and refusing
to move it leaves the user looking at mail they cannot get out, so it goes
to the inbox and the status bar says so. From a second press of Delete the
message is not in the trash at all and merely wears a stale `deleted` tag
from an older version or a hand-written notmuch command; moving that to the
inbox would relocate mail the user never asked to move, so the tag comes
off and the file stays put.
The inbox FOLDER is a new optional per-account `inbox` key, defaulting to
"Inbox". It is configurable rather than hardcoded because the name is not
ours to assume: naming a folder that does not exist CREATES it, beside the
real one, and under mbsync's `Create Both` that folder reaches the mail
server. That is not hypothetical, it is what a truncated origin folder did
to real mail while this branch was being tested. Unlike `trash` the key is
optional, since the default is right for any ordinary Maildir and a wrong
value here only affects the fallback.
Ctrl+R, which was free. The action is only enabled in the trash view, so
the key is inert elsewhere rather than doing something surprising. It sits
in the Message menu beside Delete and in the thread context menu, greyed
outside the trash rather than hidden: an action that vanishes teaches
nothing, while a disabled entry with its shortcut beside it says both that
it exists and where it applies.
**Adding an action is FIVE places, not four.** knownActions(),
defaultBindings() and the icon table are each enforced by a test that fails
loudly, and being REACHABLE is a fifth that nothing checked: this shipped
registered, bound, iconned, correctly enabled, and present in no menu at
all, which a green suite reported as complete. Ctrl+R is not a shortcut
anyone guesses, so it was effectively invisible.
restoreIsReachableWithoutTheKeyboard() closes that, and deliberately
excludes the context menu from its menu-bar assertion, since findChildren
returns both and one check would otherwise satisfy the other.
Four tests, each mutation-checked. Two worth keeping: the hardcoded "Inbox"
mutation fails against the fixture's lowercase folders exactly as it would
against a Maildir that spells its inbox differently, and the reachability
mutation reproduces the keyboard-only state this shipped in.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
A thread's card has rendered one message since item 66, but every tag
action still acted on the entire conversation. Delete, Archive,
Important, Mark spam and Toggle unread now act on the message the card
shows; the whole-thread versions move to a "Whole thread" submenu in the
Message menu and the thread list's context menu, on Ctrl+Alt+<key>.
Closes items 87, 88, 105, 106, 107, 108, 109, 110 and 111.
The defects fixed along the way, several found by reading rather than by
report:
- threadAt(current.row()) answered about the wrong thread for a reply
row, because a tree numbers rows per parent. The audit found four live
sites, not the one reported: Delete and Toggle unread each chose their
DIRECTION from an unrelated thread, and the tag dialog counted the
wrong thread's tags. threadFor(index) replaces them.
- A message-scoped write made no optimistic model update and no reply
row carried a doomed cue, so acting on a reply moved the pending-edit
count and changed nothing on screen.
- Both toggles read the state of a reply's THREAD, which a
message-scoped write never changes, so they were one-way: the second
press re-sent a tag the message already had.
- flushHeldEdits() re-sent only thread-scoped edits, so a tag change
made on one message during a sync was applied to the row, counted as
unsynced, and then dropped without ever being written.
- applyTagChange() updated a thread's summary but not its loaded
replies, leaving an expanded thread's rows describing a state the
database no longer held.
- A thread's first message is not among its children, so both
message-scoped lookups missed it: acting on a root card repainted
nothing and emptied the message pane's chip row.
- ThreadSummary::tags is notmuch's union over the thread, so a card
standing for one message drew tags belonging to its siblings. The
worker now reads that message's own tags in the walk that already
finds its id, so the split is known before a row is ever opened.
The card shows both tiers: its own message's tags at full size, the rest
of the conversation's smaller and muted, so nothing appears to vanish
when a row is selected.
Auto mark-read is message-scoped as a result, and now arms for a reply,
which it never did. With maildir.synchronize_flags on, the old
thread-wide write reached the server for mail that had never been
displayed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Nothing loaded a translation before this: no QTranslator, no .ts file and
no build rule, so every string was English whatever the locale said. The
language now comes from the environment, LANG=it_IT.UTF-8, and any other
locale runs in English as before.
The audit found that the tr() discipline was largely holding, and found
eight strings that could never be translated into any language. kFields[]
in tagrulesdialog.cpp declared the rule-builder field labels with
QT_TR_NOOP inside an anonymous namespace, where lupdate reports "tr()
cannot be called without context" and extracts nothing, while the use site
calls TagRulesDialog::tr() on them at runtime. From, To, Cc, Subject, Tag,
Folder, Attachment and Date: the whole vocabulary of the rule builder,
absent from every translation file that could ever exist. The source
compiles and reads correctly; only lupdate reveals it.
Q_DECLARE_TR_FUNCTIONS is not the fix for that case, though it is the fix
for a free function calling tr(). Measured against lupdate: a class
carrying the macro beside the array still extracts 0 strings, because the
context must be attached to the literal itself. QT_TRANSLATE_NOOP names it
explicitly and matches the tr() that already reads them, so the use site
needed no change.
Twenty configuration and keybinding warnings were not translatable either.
They are user-facing, reaching the status label and the "Configuration
problems" dialog. Config already had the tr() macro; KeyMap needed it.
Translating the filter labels then broke startup_query, found in hand
testing: a filter's name is a translated label, so `startup_query = Inbox`
matched nothing where the filter shows as "In arrivo". The application
opened a different view and reported the user's own working config as
invalid. Resolution matches the generator as well now, which is stored in
queries.json and identical in every locale; the translated name still
works. The regression test installs a real QTranslator rather than a stub,
since the bug lives in the gap between the stored string and the displayed
one, and it writes a queries.json because the warning it asserts on is
guarded by a non-empty saved-query list: without one the branch never runs
and the test passes against a broken check.
main.cpp's --help and --version stay bare printf, as they run before
QApplication exists and no translator could serve them.
Verified per the backlog's own standard, that lupdate output is the
evidence rather than reading: 355 strings extracted with zero context
warnings, where before there were 327 with eight; lrelease reporting 355
finished and 0 unfinished; the built .qm loaded in a standalone probe
printing "From -> Da" and both Italian plural forms; and the install rule
placing it where main.cpp looks. test_translations guards it and was
mutation checked, failing on an emptied translation and naming the defect
when QT_TRANSLATE_NOOP is reverted.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Second half of item 23, on top of the storage change. A query can now be kept
without hand-editing a file, and the row of buttons no longer grows without
bound.
Ctrl+S opens a dialog on whatever is in the query bar, taking a name, an
optional account scope and whether the query is pinned. It preselects the
account already chosen in the dropdown, since that is the scope the user is
looking at, and it says so when a name is about to replace an existing query
rather than refusing the name: overwriting a saved query on purpose is a normal
edit, and the only thing worth preventing is doing it without noticing. Saving
over an entry keeps the stored entry's unknown fields rather than the dialog's
fresh value, so a field written by a later build survives being edited here.
The saved queries move to a row of their own beneath the query bar, pinned ones
as buttons and the rest behind a More queries menu that only exists when
something is in it. The ponytail note that stood in the query row predicted
exactly this: an unbounded list of buttons sharing the row squeezed the field.
Sent moves down with them and is still not a saved query, for the reason already
recorded there.
A saved query's account scope goes through the account DROPDOWN rather than
being baked into the query text. runQuery() already wraps the query in the
selected account's path, so pre-scoping here would apply it twice, and setting
the dropdown also shows the user which scope they are in. An unscoped query
clears the selection rather than inheriting whatever the last one left, which is
the same defect the rules preview had.
Seven tests, three mutations. Ignoring the pinned flag fails two of them,
pre-scoping the text instead of setting the dropdown fails two, and letting an
unscoped query inherit the previous account fails one. The menu-absence test
initially passed against no implementation at all, since it only asserted a
widget was missing; it now proves the row was populated first, which is the
guard that class of test needs.
Two existing invariants caught real omissions rather than needing adjustment:
every registered action must appear in KeyMap::knownActions(), which is what
gives it a configurable binding, and every action needs its own icon.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Counts are generation-stamped and dropped when stale or when the dialog
has closed: counting every rule against a cold index takes seconds, so
an in-flight reply outliving its dialog is ordinary rather than rare.
The stamp is its own counter, not m_generation as drafted. That one is
the QUERY generation, compared against directly by every thread, tree
and message load, so bumping it to count rules would discard whatever
the user was opening at the time and blank the message pane for an
unrelated reason.
Registering an action obliges two more entries, both enforced by tests:
the name in KeyMap::knownActions(), and a default binding, since every
action carries one. Ctrl+Shift+T, shifted against Ctrl+T for edit_tags
the way Ctrl+Shift+U is shifted against Ctrl+U.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
next_thread and prev_thread now walk with indexBelow/indexAbove, skipping
message rows, so they keep meaning thread-to-thread whatever is expanded.
Stepping message-to-message needs no code: QTreeView's own Up/Down walk VISIBLE
rows and already enter an expanded thread, and being the view's key handling
rather than a shortcut they stay inert when the message pane, a menu or an entry
bar has focus.
Item 60 turns out to have been fixed already, in 5487d58 on this branch, by
threadRowOf() walking up to the containing thread before doing the arithmetic.
The backlog entry was written against master, where that helper does not exist,
so it described a defect this branch had resolved a commit earlier. Verified by
writing both failing tests first and watching them pass: from the last reply of
an expanded thread, and from a thread root with its replies showing. They are
kept, because the property they assert is the one this change must not lose.
What the rewrite buys is that nothing is keyed on a row number any more, which
is the rule a deeper tree would break next.
Alt+Up/Down added alongside Ctrl+J/K. That required KeyMap::sequencesFor and a
move from setShortcut to setShortcuts, because the singular setter keeps only
the last binding and the second one was silently unreachable. Alt because
Shift+arrows is the built-in extend-selection that multi-row tagging depends on,
and because a bare arrow cannot be a window shortcut without breaking every text
field in the window, as Return already demonstrated. sequencesFor puts
sequenceFor's own choice first so the menus advertise an unchanged binding, and
sorts the tail, since QHash order is unspecified.
|
|
Blanking the pane while leaving the row highlighted reads as half an
action, and deselecting is what Escape means nearly everywhere else. The
user asked for two actions rather than a changed one, so clear_pane keeps
its behaviour and moves to Shift+Esc; clear_selection takes Escape and
does both. Shift+Esc rather than unbound because every action carries a
default and a test enforces it.
Clearing the selection re-adopts the thread it just cleared, unless done
in exactly the right way. clearSelection() leaves currentIndex() valid,
so onSelectionChanged takes its "one or fewer rows" branch, sees a
current row whose id differs from m_currentThreadId, and calls
onThreadSelected for it. Clearing the selection before blanking lets that
run while the id still matches, so nothing reloads, and clearing current
stops a later collapse-to-one-row reaching the same row. All four
arrangements were tried; only this one passes.
The first version of the test could not distinguish any of them. It
asserted showingPlaceholder(), which passes regardless because this
fixture has no worker, so loadThread never replies and the pane is never
repainted. currentThreadId() and currentIndex() are observable without
one, and asserting those is what made the test discriminate.
|
|
An action removing "unread" from every thread in the current view,
on the toolbar, the Message menu and Ctrl+Shift+U. It deliberately
ignores the selection, which makes it the one action in the window
that does, and it routes through the same funnel as every other tag
change, so it is one write rather than one per thread.
Disabled until the query reports its total. Threads arrive in batches,
so before then the model holds only what has landed, and an action
saying "all" must not silently skip the rest. A greyed control says
"not yet" without needing a dialog or a stall the user cannot see.
The state is also set at registration, since QAction starts enabled
and a window that has not run a query has nothing to act on.
Two things came out differently from the plan, both forced by existing
code. It carries a default binding, because everyActionHasAShortcut
requires every registered action to have one: an unbound action is
unreachable from the keyboard, and that invariant is deliberate, so the
action was given Ctrl+Shift+U rather than the invariant relaxed. And
only the threads that are actually unread are sent, because sending the
rest would inflate the pending-edit count with writes that change
nothing, and the quit prompt reads that count. A view with nothing
unread does nothing, pushes no command and says so: an undo entry that
restores nothing is worse than none, since it absorbs a Ctrl+Z meant
for the previous action.
undoDepthForTesting() is new and exists for a reason worth recording:
undo->isEnabled() cannot answer "was a command pushed", because the
undo QAction is always enabled and tests canUndo() when triggered. The
first version of the no-op test asserted on it and passed against a
mutant with the unread filter removed.
Closes item 43.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Items 29 and 32.
29 was a constraint item 27 specified and that shipped unbuilt: while a
cron sync held the lock the Sync button stayed clickable, and pressing it
could only produce the EX_TEMPFAIL skip. The progress bar and the button
are now written by one updateSyncControls() taking both sync sources,
which the item asked for by name: two independent assignments, one per
path, means whichever finishes second wins, so a background sync ending
would re-enable the button in the middle of a local run.
Unknown re-enables the button, deliberately. It means /proc/locks could
not be read and nothing was observed, so leaving the button disabled
would strand it permanently wherever the lock cannot be seen.
32 adds a clear_pane action on Esc. It clears m_currentThreadId with the
pane, not merely alongside it, or a threadLoaded still in flight would
paint the thread straight back; and it cancels any pending mark-read,
since a thread blanked from view must not be marked read two seconds
later. The selection, the query and the undo stack are untouched.
The one real risk in 32 was Escape being stolen from the query
completer, the way Return was once lost to a window shortcut. Probed
rather than reasoned about: a popup consumes the key before a
window-level shortcut sees it, so the completer still dismisses.
Every test here was verified by reverting the code it covers.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Multi-select already worked by Ctrl+click and Shift+click, but nothing in
the UI said so and every tag action was keyboard-only, so the Ctrl+T tag
dialog could not be reached with a mouse at all.
Adds a select_all action on Ctrl+A, registered like every other action so
it reaches the Edit menu, the shortcut reference and [keys]; a right-click
menu on the thread list built from the same QActions rather than parallel
copies; a selection count in the status bar, which is the part that
actually teaches the feature by acknowledging a selection while it is
being built; and a note in the shortcut dialog for the mouse gestures,
which are view behaviour and cannot appear in the generated table.
A selection gesture must not open mail or mutate it. Selecting several
rows now blanks the message pane and cancels any pending mark-read,
rather than rendering each row swept through and queueing it to be marked
read.
Two Qt behaviours shaped this, both established by probe rather than from
memory:
- selectAll() emits no currentRowChanged at all and leaves the current
index invalid.
- currentRowChanged is emitted BEFORE the selection model is updated.
The second one caused two distinct faults. Collapsing a multi-row
selection back to one row reported the old count, so the guard swallowed
the load and the pane stayed blank; that case is handled in
onSelectionChanged, which sees the true count. And a Ctrl+click taking
the selection from one row to two also reported one, so the thread was
loaded, blanked, and then painted back when the queued reply returned
from the worker. By the third row the id was already cleared and the
reply was discarded, which is why the fault presented as an off-by-one in
the threshold rather than as a race.
Tests cover the synchronous half. The late-reply guard has no test:
MainWindow in tests has no worker, so threadLoaded never fires and the
repaint cannot be reproduced in process. Verified by hand instead.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Five hardcoded tags were the only ones reachable from the UI: archive,
delete, spam, flag and toggle_unread. For an application whose purpose is
organising mail by tag, applying any other one meant leaving for a
terminal. Item 26 of the usability backlog, raised by the user asking how
to add a tag and finding they could not.
One dialog rather than separate add and remove actions, at the user's
choice: filing something under a new tag while dropping inbox is one
thought, not two. Type tags to add or remove, comma separated, or clear a
checkbox to drop a tag already on the selection without retyping its
name.
Both fields complete against the tag list MainWindow already holds for
the query completer. Completion is a guard against typing shoppping
beside shopping, never a whitelist: inventing a tag is the entire point,
so any valid name goes through whether or not it exists yet.
Tri-state checkboxes carry the multi-thread case, and are where the risk
is. A tag on some selected threads shows partially checked, and leaving
it alone changes nothing; the opposite reading would silently tag threads
the user never looked at. A tag already on every thread and left checked
is likewise not a change and is not sent as one.
Tag names are validated before anything is applied, through a free
function so the rules are testable on their own. Empty, a leading dash
(notmuch's CLI reads it as removal, making such a tag a trap), whitespace
and control characters are refused by name and reason. Nothing is applied
until the whole set passes, since the user cannot tell which half of a
partial change landed.
TagDialog is pure UI: handed the vocabulary and the current state,
returning two lists, contacting no worker. That is what lets its fifteen
tests run without a notmuch database. Integration is a single call to the
existing tagSelected(), so undo, the optimistic model update, the
combined multi-row query and the completer refresh for a brand-new tag
all come for free.
One test assumption was wrong and the code was right: a case asserted
that QStringLiteral("null\0byte") truncates at the null and reads as
empty. It does not, so the null is caught as a control character. The
test was corrected rather than the validator.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
MimeParser has filled To and Cc all along and HtmlBuilder simply never
interpolated them, so both were parsed on every message and then
discarded. The header strip showed the subject and a message count and
nothing else, which is item 2 of the usability backlog.
The header now adapts to what it can say honestly. A thread holding one
message shows From, To and Cc under the subject, where every field is
unambiguous. A thread holding several keeps showing the subject and the
count alone: the recipient differs message to message, and once the user
has replied there is no single address the thread is addressed to, so
naming one would be a guess presented as a fact. Per-message detail is
what the dialog is for.
That dialog lists Subject, From, To, Cc, Date and Message-Id for every
message, numbered when there is more than one, in a read-only plain-text
widget. Plain text is the security decision, not a stylistic one: these
values come from strangers and the dialog exists to show them verbatim,
so the format that cannot interpret markup is the right one. The header
label is RichText and every value interpolated into it is escaped, since
an unescaped From injects into the application's own chrome rather than
into the sandboxed page.
Reached by a Details... button beside the subject and by Ctrl+Shift+D.
Both, because a shortcut alone restates the complaint this backlog opened
with. The binding is shifted because Ctrl+D is delete, and the
destructive action keeps the key it already had rather than being moved
to make room.
An empty Cc omits its row instead of printing a label with nothing after
it. Both header shapes were rendered to PNG and inspected, not only
asserted.
The new button also exposed a latent flaw in an older test:
attachmentButtonLabels() identified attachment buttons by excluding the
one other button's label, so it counted the details button as an
attachment as soon as one existed. It now finds the bar by object name
and reads only its children.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
KeyMap::defaultBindings() is the single source of truth for shortcuts:
the menus, the shortcut reference dialog and loadDefaults() all read it,
so registering here makes the binding appear in the reference and stay
rebindable from [keys] without any of them disagreeing.
Ctrl+Space is a modifier plus a named key, so it sidesteps the bare
capital trap in normalizeSequence() and needs no Shift on any layout.
Verified it parses to a single non-empty combination that round-trips to
"Ctrl+Space", and it collides with no existing default.
Note test_mainwindow now fails its everyKnownActionIsRegistered()
assertion: MainWindow does not yet implement complete_query. That wiring
is a separate task, and the assertion firing is the intended signal.
|
|
Zoom was Chromium's, not the application's: the web view handled the
keys natively and never told anyone, so there was no value to save.
qtmaildir now owns it. Zoom in, out and reset are real actions, in the
View menu and rebindable through [keys], and the factor is persisted to
the UI state file. Ctrl+wheel over the body zooms and Ctrl+middle-click
resets, both filtered by ancestry from an application-level filter: the
events are delivered to an internal QQuickWidget the web view creates
lazily, so a filter on the view itself never sees them.
The factor is clamped to 0.5 - 3.0, and NaN, infinity, zero and negative
values fall back to 1.0, since a corrupt state file must not be able to
leave the pane unreadable with no visible way back.
Both risks the plan flagged turned out not to exist, verified by probe
rather than assumed. The application QAction wins over the web view's
native zoom key, so the tracked factor cannot diverge from what is on
screen. And the factor survives setHtml(), so the web view is the single
source of truth and needs no reapply per render.
A third finding is worth recording because it produced a wrong fix
first. A probe using QTest::keyClick() reported Ctrl++ as a dead
binding, and a test was written asserting that. Both were wrong: Ctrl++
is exactly what the '+' key emits on an Italian layout, confirmed
against the real keyboard, and it is the shipped default. Whether a
symbol needs Shift is a property of the layout, not of Qt, and
keyClick() reproduces neither. The test now only checks that every
default parses, and the comment in defaultBindings() says not to
re-derive this from synthetic input.
Ctrl+= is a second binding for reset, skipped when [keys] gives it to
something else.
Also fixes a pre-existing bug the new config key exposed. [general]
entries were read as "general/<key>", which matches nothing: QSettings'
INI backend treats a section literally named [general] as its own
fallback section and strips the prefix. notmuch_config had therefore
never worked. Both keys are now read without it; the file format is
unchanged.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Actions were a QHash of std::function dispatched by an event filter,
which nothing could put in a menu. They are QActions now, bound from
KeyMap so a [keys] override reaches the menus as well as the keyboard.
Menu bar covers every action; the toolbar carries only Sync, Archive,
Delete and Undo. Help > Keyboard shortcuts is generated from the actions,
so it shows what the keys really do rather than a copy that drifts.
spam and load_remote gained defaults, having been unreachable without a
hand-written binding.
The event filter is gone. Probing showed QAction shortcuts are dispatched
before the focused widget sees the key, so they beat QAbstractItemView's
type-to-search without one, and Qt already suppresses plain-letter
shortcuts while an editable widget has focus. Dropping the filter's
blanket guard also lets Ctrl+Q work while the query bar has focus.
registeredActionNames() is derived from the actions rather than
hand-maintained, so the two drift tests it needed are replaced by checks
that a configured binding reaches its action.
No confirmation dialogs: tag mutations still answer to undo.
|
|
Typing a capital emits Shift+<key>, but QKeySequence::fromString() folds
the case of a bare letter away: "N" parsed to plain Key_N, a combination
no keystroke produces. The N, F and G defaults (toggle_unread, flag and
sync) therefore never fired, and neither would any hand-written capital
in [keys].
normalizeSequence() rewrites a bare capital to Shift+<letter> and is
shared by the defaults and the override pass. As a side effect "y" and
"Y" become distinct keys rather than a collision that dropped one.
Defaults move to modifier shortcuts throughout. A single letter cannot
be a QAction shortcut without stealing that letter from every text field
in the window, and the menus in the next commit need real accelerators.
defaultBindings() is now the one source of truth for them.
|
|
Confirmed with the maintainer as v2-only rather than v2-or-later. LICENSE is
the official text from gnu.org. Every file under src/ and tests/ carries the
matching notice.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
loadOverrides() inserted straight into m_bindings, so two override
lines that normalize to the same QKeySequence (e.g. "y" and "Y", both
"Y" per QKeySequence) silently overwrote each other with zero warning,
contradicting the "a typo cannot bind silently" contract on
knownActions().
Track sequences seen within the current override pass separately from
m_bindings (which already holds the defaults) so overriding a default
key stays silent, but two colliding override lines produce one warning
naming both actions.
|
|
Maps key sequences to action name strings, with hardcoded vim-style
defaults and QSettings-based [keys] overrides. Unknown actions and
unparseable sequences are collected as warnings rather than treated
as fatal, so a typo in the config cannot silently misbind or crash.
Note: QKeySequence::fromString() on Qt 6.11 does not return an empty
sequence for unparseable input (e.g. "NotAKey++") -- it returns a
non-empty sequence whose toString() is empty. Detection uses that
instead of isEmpty().
|
