| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Adds a `sent` key to [account.*] naming that account's sent folder, and a
Sent button beside the saved queries that composes its query from every
account carrying one. An account without the key is omitted silently, as a
real account may keep no sent mail locally. With no account selected the
button spans all of them; selecting one narrows it through the existing
scope wrap rather than a second path.
Composed at run time rather than shipped as a [queries] entry. A saved query
is one fixed string: it cannot narrow to the selected account, and it goes
stale the moment an account is added or a provider renames a folder.
The design and the measurements behind it are in
docs/superpowers/specs/2026-08-11-sent-mail-design.md. Three things there are
worth repeating here.
The composed path is QUOTED, and that is load-bearing. A real provider nests
its sent folder under a bracketed parent, and "[" and "]" are Xapian syntax:
unquoted, the query parses rather than matches and returns nothing while
looking entirely plausible. Composition happens in one place so there is one
chance to get it right, and a bracketed path is pinned in a test.
Recipients are opt-in per query, which is a performance contract rather than
a preference. notmuch_message_get_header(m, "To") is not served from the
index, it reads the message file: folding every thread of a 4411-thread
inbox took 38.2 seconds against 251 ms for the 601-thread sent view. The
worker skips the walk entirely unless asked, and the refresh path carries the
same flag so a background sync cannot blank the column mid-read. Always
folding is mutation-tested: the data would be right and only the cost wrong,
which nothing else here would notice.
The messages reached through the thread are owned by it and freed with it, so
recipientsOf() holds them raw and finishes while the thread is alive, exactly
as walkReplies does. An NmMessage wrapper there is a double-free.
Sent mail is presented flat, and the pane follows. A message you sent
otherwise drags in the replies you received, so a view labelled Sent shows
conversations rather than what you sent. ThreadListModel::setFlatMode() makes
hasChildren() and ReplyCountRole answer differently and changes nothing else;
runQuery() sets it on EVERY run, so any other query restores the tree on its
way through and the flag cannot outlive the button that set it. The pane
needed its own fix for the same reason: the single-message path depends on a
field only filled when a thread is expanded, which never happens in a flat
list, so loadThread() gained matchedOnly and drops the messages that did not
match instead of rendering them as stubs.
Recipients replace the sender through the existing SendersRole rather than a
new one, so the delegate needs no branch and cannot disagree with the model
about which name a row shows. It falls back to the sender when a To header is
absent or unparseable, since a blank where a name belongs reads as a
rendering fault.
Address parsing uses GMime: a display name may contain a comma, so
"Rossi, Mario" <m@example.org>, info@example.net is two addresses and
splitting reports three. internet_address_list_parse returns NULL for an
empty string, which is a crash if unguarded.
Backlog item 63.
|
|
Adds [general] date_format, a QDateTime pattern for the date a thread card
shows. Absent or empty means the system locale's short format, which is what
every other application on the desktop uses and stays the default.
The format reaches the LAYOUT, not only the painter. CardLayout::compute()
reserves the date's width from widestDateSample(), so a pattern that arrived
only at the drawText call would be elided into a rect sized for the old
format, which is the clipping the bold-font fault already produced once. It
rides on CardLayout::Input and defaults to an empty string, leaving every
existing call site unchanged. Confirmed by mutation: making the width ignore
the format fails the test.
widestDateSample() memoised its result in a static, which would have sized
every format after the first from whichever arrived first. It is a plain call
now, costing one QLocale lookup per row, the same as formatting the date.
Validation rejects only a pattern whose output is CONSTANT, found by
formatting two different instants and comparing. QDateTime::toString() treats
nearly every letter as a field, so "banana" formats as "bpmnpmnpm" and
"hello" as "22ello": nonsense, but they vary with the instant, and a check
claiming to find "no date field" cannot reject them. What harms the user is
the pattern that prints the same text on every card, and that is what is
refused, with the value named in the message.
The model supplies the pattern through DateFormatRole for the same reason it
supplies the tag colours: it is the one object here holding config, and a
delegate reading config itself would be a second source of truth.
Backlog item 62.
|
|
The documented 0.5 to 3.0 range was already enforced, by
MessageView::clampZoom(), so message_zoom = 500 rendered at 3.0 rather
than unusably. What was missing is the report: the key parses, so
nothing ever told the user that the value in their file is not the value
on screen.
Reported rather than clamped a second time. MessageView owns the bounds
and does the work; a copy of the range in Config would be free to drift
from the one that matters, so config.cpp reports against kMinZoom and
kMaxZoom directly. This is where it differs from toolbar_icon_size,
which has no widget-side enforcement to defer to.
Backlog item 58, whose recorded cause was wrong on this point and has
been corrected in place.
|
|
Follow-up to item 56. With the toolbar now following the desktop's
button style, an "icon only" desktop makes the icon the whole control,
and this style reports PM_ToolBarIconSize as 16px, which is a small
target for a button with no text beside it.
A [general] toolbar_icon_size key, 16 to 64, defaulting to 24 rather
than to the style's own metric. Setting it to 16 restores the theme's
value.
Clamped and reported, unlike message_zoom, which documents a 0.5 to 3.0
range in the README and enforces none of it. Both ends here break the
UI that would be used to fix them: too small is an invisible icon, too
large is a toolbar taller than the window.
The unenforced message_zoom range is recorded as item 58 rather than
fixed here, since it is a separate defect that predates this change.
Also documents in the README that saved-query button labels are the key
names from the user's own [queries] section, which is why the "Flagged"
button still read that way after the action was renamed: it is a user's
query name, not a string this code owns. The sample config now shows
`Important = tag:flagged` to teach the wording the UI uses.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Item 54. A sync fired by the user's cron carries tag edits to the mail
store exactly as a local one does, but only onSyncFinished() cleared the
pending state, so the indicator kept reporting work that had already
shipped and the exit prompt asked to sync for it. Verified against a
real cron run: 31 changes, cleared with no manual sync.
The window cannot see an external run's exit status, and /proc/locks
carries no outcome. It does not need to: mailsync.sh already ends every
run with a "RUN END ... status=OK" banner in its log, which outlives the
process that wrote it. MailSync::lastRunOutcome() reads a bounded tail
of that file and takes the last completed marker, so no change to the
script and no optimistic guessing were needed.
Only a definite OK clears anything. A failed run, a missing or
unreadable log, and a State::Unknown lock reading all leave the count
alone: over-reporting costs a redundant sync, under-reporting costs the
user their edits.
m_editedAccounts is drained in the same place, before flushHeldEdits()
and matching the local path's ordering. Item 49 uses it to choose which
mbsync channels a run syncs, and a count that reached zero while the set
stayed full would look correct and still sync the wrong channels.
The log path comes from a new optional [sync] log key, defaulting to
where the script writes, so a test never reads the developer's own log.
Two notes on the verification, both recorded in the backlog:
- A timing probe endorsed a tail read that was not happening. The
first version of the huge-log test required the call under 100 ms
and passed with the seek deleted, because reading 10 MB is fast
either way. Replaced with an assertion on content.
- Every fixture was invented and the first batch had the wrong
timestamp format, since the script uses date -Iseconds. The tests
passed anyway, because the parser keys on the prefix and the status
token. One test now builds the banner the way the script does.
The before-flushHeldEdits ordering has no test: without a held lock the
flush is a no-op, so both orderings pass.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
A sync ran mbsync -a regardless of what changed, so tagging mail in one
account fetched all of them. The account set was not a parameter anywhere
on the path: MailSync::start() took no arguments and the script hardcoded
-a, so nothing between a tag edit and mbsync carried which account changed.
Track which accounts have edits and pass their mbsync channels through to
the script, which now takes channel names and falls back to -a when given
none. An empty set means all accounts, per the request: a sync with nothing
pending is a fetch, and narrowing that to wherever the last edit landed
would quietly stop collecting mail everywhere else.
The channel is a new optional per-account key rather than the section key.
The two names genuinely diverge, because a QSettings section key may carry
dots that the channel does not, and mbsync treats an unknown channel as
fatal rather than skipping it, so key-as-channel would fail those accounts'
syncs outright rather than degrade. It defaults to the key, so accounts
whose two names already agree need no config change.
The edited-account set is deliberately not netted the way the pending-edit
map is: that map tracks the index, where a tag removed and re-added leaves
nothing outstanding, while this tracks the mail store, where both writes
have already renamed files that mbsync still has to propagate. It is also
snapshotted before flushHeldEdits(), which inserts into it synchronously
rather than on a queued reply, so a successful sync cannot clear accounts
whose edits it never carried.
Closes item 49.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Tagging changes the notmuch index at once, but the mail store only hears
about it on the next sync, and nothing said so. Quitting with tagging
outstanding was silent. Items 18 and 19 of the usability backlog, built
together because the second needs the first's counter.
The counter cannot be QUndoStack::isClean(), which is the obvious
candidate and the wrong one: the undo stack is cleared on every query,
since its entries refer to rows the new result set discards. Tag a
thread, run any query, and the stack is empty while the change is still
unsynced. m_pendingEdits is its own count, incremented where a write is
CONFIRMED rather than where one is sent, so an optimistic update the
worker later rejects cannot leave the indicator claiming an edit that
never landed. Only a successful sync resets it: clearing on failure would
assert the changes had reached the mail store when the sync is exactly
what failed to put them there.
It is shown in the status bar, hidden entirely at zero, and described as
a lower bound rather than a guarantee, since an external notmuch run can
carry changes over without this application noticing.
On exit, sync_on_exit in [general] takes ask, always or never. Three
values rather than a bool because "prompt me", "just do it" and "do
nothing" are three behaviours and true/false expresses two; an unknown
value warns by name, since a typo there silently changes what happens to
unsynced work. The prompt offers three buttons for the same reason: a
user who hit Quit by mistake needs a way back that is not "sync". A sync
started at exit holds the window open until it finishes rather than being
killed mid-run, and a sync that FAILS does not quit, because quitting
there would discard the user's choice silently. With no sync command
configured the prompt degrades to a plain warning instead of offering a
sync that cannot run.
This is not a destructive-action confirmation of the kind CLAUDE.md
forbids. Those cover tag mutations, which keep undo instead of a dialog.
This asks about losing work at the one point where undo cannot help.
The tagsApplied lambda became a named slot, which is better structure and
also what lets a test drive it: the worker is deliberately parentless
because it moves to its own thread, so reaching it with findChild to emit
the real signal cannot work, and contorting the test to try was the wrong
instinct. Testing a modal needed its own care. A test that sends a close
event hangs forever if an unexpected dialog opens, because the modal
spins its own event loop; CloseProbe polls for activeModalWidget, closes
it and records that one appeared, turning "a dialog opened" into an
assertion rather than a hang.
Also removes a stray qDebug left in the open_thread action by the earlier
Enter-key investigation, which had reached two commits.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Opening a thread left it tagged unread, so the unread count never
matched what had actually been read and the app was quietly wrong every
day it was used. Item 6 of the usability backlog.
A single-shot timer, armed when a thread is selected and restarted rather
than stacked, so arrowing down a list marks only the thread still
selected when it fires and not every one passed through. Configurable
through mark_read_delay_ms in [general], defaulting to 2000: zero marks
read at once, and any negative value disables the behaviour, which is why
the value is neither clamped nor warned about at either end.
The automatic change deliberately does NOT go on the undo stack. It
routes through sendThreadTagChange() rather than tagSelected(), because
undoing an action the user never took is worse than leaving a thread
read, and toggle_unread already gives them a direct way back. It still
funnels through the single applyTags path; what differs is only whether
the inverse is pushed, which is a window-level decision above the worker.
An explicit toggle_unread cancels any pending timer, or marking a thread
unread by hand would be reversed a moment later and the key would look
broken.
Two guards beyond the plan, both from asking what happens when a timer
outlives the thread it was armed for. Arming is skipped for a thread that
is not unread, so no write is scheduled that would change nothing, and
the handler re-checks that its thread is still selected and still unread
before writing, so a stale timer does nothing rather than tagging the
wrong thread.
The plan expected the rapid-arrow case to need a database and a manual
check. It needs neither: ThreadListModel takes threads through
appendBatch(), so the case is unit-tested. All three tests were confirmed
to fail against deliberately broken versions, one arming for read threads
and one creating a timer per selection instead of restarting one.
Item 7 is closed in the same pass. The user verified against real mail
that HTML messages already open as HTML, which is what the item asked
for, so it is recorded as done with no code changed. The prefer_html key
it floated was not added: nobody has asked to default to plain text, and
Ctrl+H already switches a thread by hand.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Mimetypes are the one completion list with no enumerator, so the user can
extend it. Entries append to the built-ins and a malformed one is skipped
with a problem recorded rather than dropping the whole list.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
The app opened whichever saved query sorted first alphabetically, which
is not a choice anyone made: [queries] is read through childKeys(), so
savedQueries().first() means "Flagged" before "Inbox" before "Unread"
rather than anything the user expressed.
[general] startup_query names the entry to open and defaults to Unread,
so a fresh install comes up on the unified unread list. Saved-query
button order is untouched and stays alphabetical.
A name matching no saved query falls back to the first one rather than
starting with an empty view. That is reported as a problem only when the
user actually wrote the name; the built-in default naming a query they
never created is not something they got wrong, and warning about it
would fire on every launch of a config that has no Unread entry.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Zoom was Chromium's, not the application's: the web view handled the
keys natively and never told anyone, so there was no value to save.
qtmaildir now owns it. Zoom in, out and reset are real actions, in the
View menu and rebindable through [keys], and the factor is persisted to
the UI state file. Ctrl+wheel over the body zooms and Ctrl+middle-click
resets, both filtered by ancestry from an application-level filter: the
events are delivered to an internal QQuickWidget the web view creates
lazily, so a filter on the view itself never sees them.
The factor is clamped to 0.5 - 3.0, and NaN, infinity, zero and negative
values fall back to 1.0, since a corrupt state file must not be able to
leave the pane unreadable with no visible way back.
Both risks the plan flagged turned out not to exist, verified by probe
rather than assumed. The application QAction wins over the web view's
native zoom key, so the tracked factor cannot diverge from what is on
screen. And the factor survives setHtml(), so the web view is the single
source of truth and needs no reapply per render.
A third finding is worth recording because it produced a wrong fix
first. A probe using QTest::keyClick() reported Ctrl++ as a dead
binding, and a test was written asserting that. Both were wrong: Ctrl++
is exactly what the '+' key emits on an Italian layout, confirmed
against the real keyboard, and it is the shipped default. Whether a
symbol needs Shift is a property of the layout, not of Qt, and
keyClick() reproduces neither. The test now only checks that every
default parses, and the comment in defaultBindings() says not to
re-derive this from synthetic input.
Ctrl+= is a second binding for reset, skipped when [keys] gives it to
something else.
Also fixes a pre-existing bug the new config key exposed. [general]
entries were read as "general/<key>", which matches nothing: QSettings'
INI backend treats a section literally named [general] as its own
fallback section and strips the prefix. notmuch_config had therefore
never worked. Both keys are now read without it; the file format is
unchanged.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Two optional keys in an [account.<key>] stanza. color fills the chip,
label sets its text.
Both belong to the account rather than to [tagcolors] because an account
tag is a different taxonomy: which mailbox a thread arrived in, not what
state it is in.
label is display only. "account-provider-work" is a lot of
row for one bit of information, but the notmuch tag is never renamed, so
existing queries and external tagging are unaffected. Unset falls back to
the account key, and an empty label is ignored rather than rendering a
blank chip.
|
|
Confirmed with the maintainer as v2-only rather than v2-or-later. LICENSE is
the official text from gnu.org. Every file under src/ and tests/ carries the
matching notice.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Found while walking the task 13 checklist against real mail. Item 1
("startup shows no configuration warnings with a valid config") failed:
with a perfectly valid config that simply had no [sync] command, every
launch opened a blocking modal that had to be dismissed before the window
could be used.
Config now separates the two cases. A problem is something configured but
wrong (a sync command that does not exist, an account with no maildir);
those still open a dialog, as does every KeyMap warning, since each one
means a binding the user wrote is being ignored. A notice is an optional
feature simply not being configured; it reports to the status bar only.
Nothing is broken in that case, and a modal on every launch teaches the
user to dismiss dialogs unread, which defeats the ones that matter.
problems() is a subset of warnings(), so callers wanting everything need
only the latter.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
|
Accounts use [account.work] rather than [account/work]: QSettings' INI
backend treats "/" as its own hierarchical group separator, so a literal
slash in a section header parses as a nested group and trips
QSettings::FormatError, silently breaking childGroups() enumeration. A
dot carries no such meaning and keeps the format flat.
Saved-query order is alphabetical (QSettings::childKeys() sorts), not
file order; documented in code and tests rather than left to a false
assumption.
|
