diff options
| -rw-r--r-- | .extras/docs/plymouth-graphical-boot.md | 413 | ||||
| -rw-r--r-- | .extras/nvchecker.toml | 22 | ||||
| -rw-r--r-- | README.md | 14 | ||||
| -rw-r--r-- | plymouth/README | 51 | ||||
| -rw-r--r-- | plymouth/doinst.sh | 15 | ||||
| -rw-r--r-- | plymouth/plymouth.SlackBuild | 131 | ||||
| -rw-r--r-- | plymouth/plymouth.info | 10 | ||||
| -rw-r--r-- | plymouth/slack-desc | 19 |
8 files changed, 17 insertions, 658 deletions
diff --git a/.extras/docs/plymouth-graphical-boot.md b/.extras/docs/plymouth-graphical-boot.md deleted file mode 100644 index c47b121..0000000 --- a/.extras/docs/plymouth-graphical-boot.md +++ /dev/null @@ -1,413 +0,0 @@ -# Graphical boot on Slackware with Plymouth - -Notes for replacing the plain-text boot wall with a graphical splash on this -machine. Research only, nothing has been installed or changed yet. - -Written 2026-08-07. Everything under "Current system state" was measured on -that date, on the running system, not assumed. Re-verify before acting if the -kernel or hardware changed. - ---- - -## Conclusions up front - -**Do not patch the kernel.** Distributions stopped patching kernels for boot -splash around 2009. The old `bootsplash` and `fbsplash` patch sets are dead, -and the in-kernel `bootsplash` revival (Max Staudt, ~2017) never reached -mainline. `CONFIG_LOGO` still exists but only gives a 224-colour CLUT224 PPM -logo, not an animated splash. - -**Everyone uses Plymouth**, a userspace daemon started from the initrd. Ubuntu, -Mint, Debian, Fedora, all the same stack, differing only in theme. - -**SBo has both packages already**, so this is not a from-scratch port: - -| Package | Version | Notes | -|---|---|---| -| `system/plymouth` | 22.02.122 | `--disable-systemd-integration` already set, so it suits Slackware's BSD init | -| `system/plymouth-slackware-theme` | 1.1 | Theme `slackware-logo`, based on an Arch theme, ships `/etc/plymouth/plymouthd.conf` | - -Neither package touches the initrd or the init scripts. **That wiring is the -entire job** and it is all manual. - -### Update 2026-08-08: this repo now ships plymouth 26.134.222 - -SBo's 22.02.122 is four years behind upstream and **predates SimpleDRM**, which -changes the plan substantially (see below). A local package was written at -`plymouth/` in this repo, built and lint-clean on -current. Findings: - -- Upstream switched **autotools to meson**, so the SBo script could not be - version-bumped, it had to be rewritten from the meson template. -- `systemd-integration` now defaults to **true** in meson and must be turned - off explicitly, otherwise the build wants `systemd.pc` and - `systemd-tty-ask-password-agent`. -- All build deps are satisfied by stock -current, so `REQUIRES=""`. -- **It does not build on 15.0**: `PANGO_ATTR_FONT_SCALE` needs pango >= 1.50, - and 15.0 ships 1.48.11. Since 15.0 is the SBo baseline, this is not - submittable to SBo as-is. -- The SBo theme package ships its own `/etc/plymouth/plymouthd.conf` setting - `Theme=slackware-logo`, the same path the main package installs. Installing - the theme after plymouth overwrites that file. - ---- - -## How the other distributions do it - -The stack is identical everywhere: - -1. **Kernel cmdline** carries `quiet splash`. `quiet` suppresses printk output, - `splash` is a flag Plymouth reads. -2. **KMS driver** loads early (in the initrd or builtin) and creates - `/dev/dri/card*`. Plymouth's `drm.so` renderer draws on it, falling back to - `frame-buffer.so` on `/dev/fb0`. -3. **`plymouthd` runs from the initramfs**, started before the root pivot. On - Debian and Ubuntu an `initramfs-tools` hook at - `/usr/share/initramfs-tools/hooks/plymouth` copies the daemon, theme and - fonts into the image. -4. **Handoff to the display manager.** With systemd, `plymouth-start.service` - runs `Before=display-manager.service` and `plymouth-quit.service` tears the - splash down once the DM owns the screen. Both draw through KMS, so there is - no mode switch and no flicker. -5. **The daemon survives `switch_root`**, which is why it is a daemon and not a - static image. It also renders the LUKS passphrase prompt in graphics mode. - -Theme selection differs cosmetically: - -| Distro | Default theme | Selector | -|---|---|---| -| Ubuntu | `bgrt`, then spinner | `update-alternatives --config default.plymouth` | -| Mint | `mint-logo` (script module) | same | -| Debian | `spinner` / `moonlight` | same, then `update-initramfs -u` | -| Fedora | `bgrt` / `charge` | `plymouth-set-default-theme -R` | - -`bgrt` is worth knowing about: on UEFI the firmware has already painted the -vendor logo, and the kernel exposes that exact bitmap and position through the -ACPI BGRT table. Plymouth reuses it, so the screen appears never to change -between firmware and OS. It is the reason modern Ubuntu boots look seamless. - -**None of the above applies directly here.** It all assumes systemd units plus -`initramfs-tools` or `dracut`. Slackware has neither. - ---- - -## Current system state - -Measured 2026-08-07 on this machine. - -| Item | Value | -|---|---| -| Slackware | 15.0+ (-current) | -| Kernel | 6.18.41 | -| Bootloader | GRUB, EFI, config at `/boot/grub/grub.cfg`, ESP on `/dev/nvme0n1p1` | -| Root | `/dev/myvg/root`, **LVM**, ext4 | -| Initrd | `/boot/initrd-6.18.41.img`, 16M, symlinked as `initrd-generic.img` | -| `/boot/initrd-tree` | **Does not exist**, initrd is built directly by `mkinitrd -c` | -| Runlevel | 4 (`id:4:initdefault:`) | -| Display manager | SDDM (`/usr/bin/sddm`), no `rc.4.local` present | -| GPU | Intel, PCI id `e20b` (Panther Lake, per `ptl_*` firmware in the module) | -| GPU driver | `xe`, **loadable module**, currently loaded, 3.7M, 56 refs | -| Plymouth | Not installed | - -Current kernel command line: - -``` -GRUB_CMDLINE_LINUX_DEFAULT="i915.force_probe=!e20b xe.force_probe=e20b" -``` - -`GRUB_GFXPAYLOAD_LINUX=keep` is already set, which is what you want: the -graphics mode set by GRUB carries into the kernel. - -The initrd was generated by: - -``` -/sbin/mkinitrd -c -k 6.18.41 -f ext4 -r /dev/myvg/root \ - -m xhci-pci:ohci-pci:ehci-pci:xhci-hcd:uhci-hcd:ehci-hcd:hid:usbhid:i2c-hid:hid_generic:hid-asus:hid-cherry:hid-logitech:hid-logitech-dj:hid-logitech-hidpp:hid-lenovo:hid-microsoft:hid_multitouch \ - -L -u -L -R -o /boot/initrd-6.18.41.img -``` - -That string is stored inside the image as `/command_line`, so it can always be -recovered from the initrd itself. - -### The finding that matters most - -**`xe.ko` is not in the initrd.** The only DRM-related module present is -`drm.ko`, pulled in as a dependency of something else. Verified by extracting -the image and listing every `.ko`: - -``` -asus-wmi dm-bufio dm-snapshot drm ehci-hcd ehci-pci hid-asus -hid-cherry hid-generic hid-lenovo hid-logitech hid-logitech-dj -hid-logitech-hidpp hid-microsoft hid-multitouch hid i2c-hid -ohci-hcd ohci-pci platform_profile rfkill sparse-keymap uhci-hcd -usbhid video wmi xhci-hcd xhci-pci -``` - -`drm.ko` alone creates no `/dev/dri/card*`. Without the actual GPU driver, -Plymouth's `drm.so` renderer has nothing to draw on during the initrd phase, so -the splash cannot start until after the pivot. That is the difference between a -seamless boot and a splash that shows up halfway through, which looks worse -than no splash at all. - -So adding `xe` to the initrd is a **prerequisite**, not an optimisation. - -**Superseded on 2026-08-08 for plymouth 26.x.** The above holds for SBo's -22.02.122, which has no SimpleDRM support (verified: zero matches for -`simpledrm` anywhere in that tarball). Upstream added SimpleDRM in **24.004.60**, -and on UEFI systems plymouth 26.x uses it **by default** to draw on the EFI -framebuffer, so the GPU driver does not need to be in the initrd at all. This -machine is UEFI, so with the 26.134.222 package in this repo, **step 2.1 below -is no longer a prerequisite**, which also removes the firmware-bloat problem and -the per-kernel-update `xe` maintenance. - -Two caveats: with SimpleDRM secondary monitors stay dark during boot (irrelevant -here, root is plain LVM with no LUKS prompt), and `plymouth.use-simpledrm=0` -disables it if it misbehaves. - ---- - -## Plan - -Two stages. Stage one is reversible in seconds and may be all that is wanted. - -### Stage 1: silence the text wall (no Plymouth, no initrd work) - -Append `quiet loglevel=3` to the existing cmdline, keeping the force_probe -flags: - -``` -GRUB_CMDLINE_LINUX_DEFAULT="i915.force_probe=!e20b xe.force_probe=e20b quiet loglevel=3" -``` - -Then regenerate: - -``` -grub-mkconfig -o /boot/grub/grub.cfg -``` - -This alone removes the scrolling kernel messages. No packages, no initrd -changes, nothing that can prevent a boot. Optionally add -`vt.global_cursor_default=0` to suppress the blinking cursor. - -**If this is enough, stop here.** - -### Stage 2: actual Plymouth splash - -Ordered by dependency. Do not skip step 1. - -#### 2.1 Get `xe` into the initrd, and confirm it still boots - -Rebuild with `xe` added to the module list, keeping every existing flag from -`/command_line`: - -``` -/sbin/mkinitrd -c -k 6.18.41 -f ext4 -r /dev/myvg/root \ - -m xhci-pci:ohci-pci:ehci-pci:xhci-hcd:uhci-hcd:ehci-hcd:hid:usbhid:i2c-hid:hid_generic:hid-asus:hid-cherry:hid-logitech:hid-logitech-dj:hid-logitech-hidpp:hid-lenovo:hid-microsoft:hid_multitouch:xe \ - -L -u -L -R -o /boot/initrd-plymouth.img -``` - -Note the **different output name**. Keep `initrd-6.18.41.img` untouched as the -known-good fallback, and add a second GRUB entry pointing at the new image. See -"Safety" below. - -Firmware is the catch. `xe` declares 39 firmware files, and `/lib/firmware/xe` -is 5.5M (`/lib/firmware/i915` is another 27M, and the `xe` module references -`i915/*` blobs too for older parts). For this GPU only the `ptl_*` files should -be needed: - -``` -xe/ptl_guc_70.bin -xe/ptl_huc.bin -``` - -`mkinitrd -u` pulls firmware automatically, but verify after building that -those files are actually inside the image. Missing GuC/HuC firmware makes the -driver fail or fall back, and the splash goes with it. - -Boot this and confirm the system still comes up before going further. - -#### 2.2 Install the packages - -``` -sbopkg -i plymouth -sbopkg -i plymouth-slackware-theme -``` - -The theme drops `/usr/share/plymouth/themes/slackware-logo/` and -`/etc/plymouth/plymouthd.conf` containing: - -``` -[Daemon] -Theme=slackware-logo -``` - -#### 2.3 Populate the initrd with Plymouth - -Upstream ships `plymouth-populate-initrd`, but it is written for -dracut/initramfs-tools layouts and will not slot into Slackware's initrd-tree -cleanly. Expect to copy by hand. - -Required inside the image: - -- `plymouthd` and the `plymouth` client binary -- `/usr/lib64/plymouth/renderers/drm.so` and `frame-buffer.so` -- `/usr/share/plymouth/themes/slackware-logo/` in full -- `/etc/plymouth/plymouthd.conf` -- the label plugin **and its fonts**, if the theme draws any text -- every shared library the above link against (check with `ldd`) - -The font omission is the classic failure: the theme renders blank or partially, -and it is not obvious why. - -Since `/boot/initrd-tree` does not exist, either create one with -`mkinitrd -s`, add the files there and rebuild from it, or unpack the generated -image, add the files, and repack. The tree approach is more repeatable. - -#### 2.4 Start the daemon inside the initrd - -`/init` in the initrd is `#!/bin/ash`. Module loading happens through -`/load_kernel_modules`, which is a plain list of `modprobe -v` lines. - -After the DRM module is up and before any LUKS prompt, add: - -```sh -plymouthd --mode=boot --attach-to-session -plymouth show-splash -``` - -Ordering matters: `xe` must already be loaded, otherwise there is no -`/dev/dri/card0` to render to. - -#### 2.5 Kernel cmdline - -``` -GRUB_CMDLINE_LINUX_DEFAULT="i915.force_probe=!e20b xe.force_probe=e20b quiet splash" -``` - -`splash` is the flag Plymouth looks for. Keep `GRUB_GFXPAYLOAD_LINUX=keep`. - -#### 2.6 Quit the splash at the right moment - -There is no systemd, so nothing tears the splash down automatically. Runlevel -is 4 and the display manager is SDDM, started from the end of `/etc/rc.d/rc.4`. - -`rc.4` `exec`s the DM, so anything appended after that never runs. The call has -to go **before** the `exec` chain, or into `/etc/rc.d/rc.4.local`, which `rc.4` -checks for first and which does not currently exist. `rc.4.local` is the -cleaner hook because it leaves the stock script untouched, but note it also -`exec`s, so it would have to start SDDM itself. - -```sh -/usr/bin/plymouth quit --retain-splash -``` - -`--retain-splash` leaves the last frame on screen so SDDM can fade in over it -rather than flashing a bare console. For a console-only boot, call -`plymouth quit` at the end of `rc.M` instead. - ---- - -## Do the boot messages stay reachable? - -Yes. This is what Debian and Mint do, and it is not a systemd feature. -Pressing **Esc** during boot switches from the splash to the boot text. -Plymouth also does its own console redirection and logs messages to -`/var/log/boot.log`, independent of any init system, which is why -`plymouth.nolog` is documented as disabling "logging and console redirection". - -Slackware caveat: `rc.S` and `rc.M` are not plymouth-aware the way Debian's -systemd units are, so there are no `plymouth message` progress updates tied to -boot stages. Whether the rc output ends up behind the splash depends on -plymouthd surviving `switch_root` and holding the console, see below. Stage 1 -alone (`quiet loglevel=3`) does **not** silence the rc scripts, it only -suppresses kernel printk, which is why the wall is still there after stage 1. - -## Known problem areas - -**`switch_root` continuity.** This is the most likely thing to consume time. -`plymouthd` holds the VT, and its socket lives in `/run`. The daemon must not be -killed when the initramfs is torn down, and the real root needs a matching -`/run` for the client to reconnect. Get it wrong and the splash dies at the -pivot, dropping to a text wall for the second half of boot. Note that `/run` in -the current initrd is an empty directory. - -**LVM plus splash ordering.** Root is on `/dev/myvg/root`, so LVM activation -happens in the initrd. Plymouth should be started before that, so the splash -covers the LVM and filesystem phase rather than appearing after it. - -**Firmware bloat.** Pulling all of `/lib/firmware/xe` plus the `i915` blobs the -module references would add a lot to a 16M initrd. Restrict to the `ptl_*` -files needed by this GPU. - -**Kernel updates.** Every kernel bump means rebuilding the initrd, and the -Plymouth files have to be re-added each time unless the initrd-tree is kept -around. This is ongoing maintenance, and the main argument for stopping at -stage 1. - -**`plymouth-populate-initrd` will not work unmodified.** It assumes a -dracut/initramfs-tools layout. - ---- - -## Safety - -The initrd is on the boot path. A broken one means no boot, and repair requires -install media. - -Before any stage 2 work: - -1. Build to a **new filename** (`initrd-plymouth.img`), never overwrite - `initrd-6.18.41.img`. -2. Add a **second GRUB menu entry** pointing at the new initrd, keeping the - working entry as the default until the new one is proven. -3. Keep install media reachable. - -`GRUB_DEFAULT=0` and `GRUB_TIMEOUT=10` currently, so there is a visible menu to -choose from, which is what makes the fallback entry usable. - ---- - -## References - -- Both SBo READMEs point at an LQ thread for Slackware-specific instructions: - <https://www.linuxquestions.org/questions/slackware-14/bootsplash-4175742241/> - It is still not readable (LQ returns HTTP 403 to automated fetches, a - browser User-Agent does not help), so **it has not been incorporated here**. - It is also an old thread, so its value is now doubtful. -- <https://wiki.archlinux.org/title/Plymouth> is the better reference and was - read on 2026-08-08. It is the source for the SimpleDRM behaviour, the Esc - toggle, and the `plymouth.nolog` / `plymouth.debug` / `plymouth.enable=0` - flags. Note it 403s to plain fetches too (Anubis); a browser User-Agent - works, or `?action=raw` for the wikitext. -- Theme upstream: <https://github.com/murkl/plymouth-theme-arch-os> -- Plymouth upstream: - <https://www.freedesktop.org/wiki/Software/Plymouth/> - ---- - -## Status - -Updated 2026-08-08. - -**Stage 1 is done.** `quiet loglevel=3` is on the kernel command line and -`grub-mkconfig` has been run. Verified after reboot: the kernel printk wall is -gone, but **the Slackware rc script output is not**, which is expected, no -kernel flag suppresses it. That is what motivates stage 2. - -**A plymouth 26.134.222 package exists** at `plymouth/` in this repo. It builds -and passes `sbopkglint` on -current, and fails on 15.0 (pango too old). It is -not installed on this machine yet. - -**Stage 2 is otherwise unstarted**, but it is now cheaper than described below: -step 2.1 (`xe` in the initrd) is **no longer a prerequisite** thanks to -SimpleDRM, so the remaining work is initrd population (2.3), starting the -daemon (2.4), the cmdline (2.5), and the quit hook (2.6). - -Next concrete step, and the cheapest way to derisk everything: install the -package and preview the theme from a console, no reboot and no initrd work -needed: - -``` -plymouthd; plymouth --show-splash; sleep 5; plymouth --quit -``` - -That confirms the renderer works on this GPU before any boot-path change. diff --git a/.extras/nvchecker.toml b/.extras/nvchecker.toml index 2793911..37ea0ba 100644 --- a/.extras/nvchecker.toml +++ b/.extras/nvchecker.toml @@ -156,14 +156,6 @@ host = "codeberg.org" use_max_tag = true prefix = "v" -# Upstream is on freedesktop.org, not a forge, so scrape the release -# directory listing. Versions are CalVer-ish (26.134.222), so sorting is -# left to nvchecker's default. -[plymouth] -source = "regex" -url = "https://www.freedesktop.org/software/plymouth/releases/" -regex = 'plymouth-([0-9][0-9.]*)\.tar\.xz' - # Typora is proprietary with no git repo, so there is no github/pypi feed. # The Linux changelog page is the only per-platform source of truth: its # newest <h2> is the current Linux version. Do NOT use dev_update.xml, which @@ -172,3 +164,17 @@ regex = 'plymouth-([0-9][0-9.]*)\.tar\.xz' source = "regex" url = "https://typora.io/releases/linux" regex = "<h2>([0-9]+\\.[0-9]+\\.[0-9]+)</h2>" + +[python3-pathvalidate] +source = "pypi" +pypi = "pathvalidate" + +[python3-onnxruntime] +source = "pypi" +pypi = "onnxruntime" + +[piper-tts] +source = "github" +github = "OHF-Voice/piper1-gpl" +use_latest_release = true +prefix = "v" @@ -63,23 +63,15 @@ Each package lives in its own top-level subfolder: | megasync-bin | ✅ | ✅ | ❌ | 6.5.0.2 | 6.5.0.2 | | claude-desktop-bin | ✅ | ✅ | ❌ | 1.24012.9 | 1.24012.9 | | hyprsunset-qt | ✅ | not tested | ❌ | 0.1.1 | 0.1.1 | -| plymouth | ✅ | ❌ | ✅ [plymouth](https://slackbuilds.org/repository/15.0/system/plymouth/) | 26.134.222 | 26.134.222 | +| python3-pathvalidate | ✅ | not tested | ❌ | 3.3.1 | 3.3.1 | +| python3-onnxruntime | ✅ | not tested | ❌ | 1.28.0 | 1.28.0 | +| piper-tts | ✅ | not tested | ❌ | 1.6.1 | 1.6.1 | > **Note on `kvantum-qt5`:** the official SBo build lags several releases behind > upstream (1.1.2 vs 1.1.8), so this repo ships an updated build. It provides the > Qt5 style plugin only (`libkvantum.so`); the kvantummanager GUI and bundled > themes come from the `kvantum-qt6` package, which upstream now builds Qt6-only. -> **Note on `plymouth`:** **-current only, it does not build on 15.0.** Upstream -> 26.134.222 uses `PANGO_ATTR_FONT_SCALE`, which needs pango >= 1.50; 15.0 ships -> 1.48.11, so `label-pango` fails to compile. Every other dependency resolves on -> 15.0, and meson there is new enough. Since 15.0 is the SBo baseline, this build -> is not submittable to SBo as-is and is not intended for submission for now. The -> official SBo build is 22.02.122, four years behind upstream and predating -> SimpleDRM support; this repo ships the current release, which also switched -> from autotools to meson. Note that installing the package alone does not give -> a splash screen, the initrd wiring is manual, see the package `README`. - --- ## Usage diff --git a/plymouth/README b/plymouth/README deleted file mode 100644 index 5dc8ef4..0000000 --- a/plymouth/README +++ /dev/null @@ -1,51 +0,0 @@ -Plymouth provides a flicker-free graphical boot process. It relies on -kernel mode setting (KMS) to set the native resolution of the display as -early as possible, then shows a splash screen leading up to the login -manager. - -Installing this package is not enough to get a splash screen. Plymouth -runs as a daemon started from the initrd, and Slackware's mkinitrd has -no hook for it, so the wiring is manual: - - 1. Add "splash" to the kernel command line (and "quiet" for a silent - boot). With GRUB, edit GRUB_CMDLINE_LINUX_DEFAULT in - /etc/default/grub and run grub-mkconfig -o /boot/grub/grub.cfg - - 2. Copy plymouthd, the plymouth client, the renderers in - /usr/lib*/plymouth/renderers, the theme directory, /etc/plymouth, - and every library they link against into the initrd, then start - plymouthd from /init before the root filesystem is mounted. - Upstream ships /usr/libexec/plymouth/plymouth-populate-initrd, but - it assumes a dracut or initramfs-tools layout and needs adapting. - - 3. Nothing tears the splash down without systemd. Call - "plymouth quit --retain-splash" before the display manager starts, - or "plymouth quit" at the end of /etc/rc.d/rc.M for a console boot. - -On UEFI systems Plymouth uses the SimpleDRM driver by default to draw on -the EFI framebuffer, so the GPU driver need not be in the initrd. -Pass plymouth.use-simpledrm=0 to disable that. Note that with SimpleDRM -secondary monitors stay dark during boot, which matters if an encryption -passphrase prompt could land on one. - -Boot messages are shown by pressing Esc during boot, and are logged to -/var/log/boot.log. Add plymouth.nolog to disable logging and console -redirection, or plymouth.debug to write debug output to -/var/log/plymouth-debug.log. If Plymouth prevents a successful boot, -disable it with plymouth.enable=0 on the kernel command line. - -The theme is set in /etc/plymouth/plymouthd.conf, which this package -installs empty for administrator overrides. Distribution defaults are in -/usr/share/plymouth/plymouthd.defaults and select the "spinner" theme. -Ten themes are shipped; list them with "plymouth-set-default-theme -l". -The "bgrt" theme reuses the vendor logo the UEFI firmware already -painted, if the firmware provides one. - -To preview the configured theme from a console without rebooting: - - plymouthd; plymouth --show-splash; sleep 5; plymouth --quit - -Keep that as one chained command, the sleep is what returns control. - -The initrd must be repopulated after every kernel update, and after any -theme change. diff --git a/plymouth/doinst.sh b/plymouth/doinst.sh deleted file mode 100644 index 02db71b..0000000 --- a/plymouth/doinst.sh +++ /dev/null @@ -1,15 +0,0 @@ -config() { - NEW="$1" - OLD="$(dirname $NEW)/$(basename $NEW .new)" - # If there's no config file by that name, mv it over: - if [ ! -r $OLD ]; then - mv $NEW $OLD - elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then - # toss the redundant copy - rm $NEW - fi - # Otherwise, we leave the .new copy for the admin to consider... -} - -config etc/plymouth/plymouthd.conf.new -config etc/logrotate.d/bootlog.new diff --git a/plymouth/plymouth.SlackBuild b/plymouth/plymouth.SlackBuild deleted file mode 100644 index a4cc813..0000000 --- a/plymouth/plymouth.SlackBuild +++ /dev/null @@ -1,131 +0,0 @@ -#!/bin/bash - -# Slackware build script for plymouth - -# Copyright 2026 Danilo M. <danix@danix.xyz> -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -cd $(dirname $0) ; CWD=$(pwd) - -PRGNAM=plymouth -VERSION=${VERSION:-26.134.222} -BUILD=${BUILD:-1} -TAG=${TAG:-_SBo} -PKGTYPE=${PKGTYPE:-tgz} - -if [ -z "$ARCH" ]; then - case "$( uname -m )" in - i?86) ARCH=i586 ;; - arm*) ARCH=arm ;; - *) ARCH=$( uname -m ) ;; - esac -fi - -# If the variable PRINT_PACKAGE_NAME is set, then this script will report what -# the name of the created package would be, and then exit. This information -# could be useful to other scripts. -if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then - echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE" - exit 0 -fi - -TMP=${TMP:-/tmp/SBo} -PKG=$TMP/package-$PRGNAM -OUTPUT=${OUTPUT:-/tmp} - -if [ "$ARCH" = "i586" ]; then - SLKCFLAGS="-O2 -march=i586 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -elif [ "$ARCH" = "aarch64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -else - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -fi - -set -e - -rm -rf $PKG -mkdir -p $TMP $PKG $OUTPUT -cd $TMP -rm -rf $PRGNAM-$VERSION -tar xvf $CWD/$PRGNAM-$VERSION.tar.xz -cd $PRGNAM-$VERSION -chown -R root:root . -find -L . \ - \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ - -o -perm 511 \) -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ - -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; - -# Upstream derives the version from the source directory name, so the -# extracted tree must stay named plymouth-$VERSION. - -# systemd-integration defaults to true and pulls in a systemd pkg-config -# dependency plus systemd-tty-ask-password-agent, so it has to be turned off. -# Likewise release-file defaults to /etc/system-release, which does not exist -# on Slackware. tracing enables verbose debug spew, docs needs xmlto/docbook. -mkdir build -cd build - CFLAGS="$SLKCFLAGS" \ - CXXFLAGS="$SLKCFLAGS" \ - meson setup .. \ - --buildtype=release \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --localstatedir=/var \ - --mandir=/usr/man \ - --prefix=/usr \ - --sysconfdir=/etc \ - -Dstrip=true \ - -Ddocs=false \ - -Dsystemd-integration=false \ - -Dtracing=false \ - -Dbackground-color=0x000000 \ - -Drelease-file=/etc/slackware-version - "${NINJA:=ninja}" - DESTDIR=$PKG $NINJA install -cd .. - -# Don't clobber the admin's configuration on upgrade. -mv $PKG/etc/plymouth/plymouthd.conf $PKG/etc/plymouth/plymouthd.conf.new -mv $PKG/etc/logrotate.d/bootlog $PKG/etc/logrotate.d/bootlog.new - -find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \ - | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true - -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -cp -a \ - AUTHORS COPYING README.md \ - $PKG/usr/doc/$PRGNAM-$VERSION -cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild - -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc -cat $CWD/doinst.sh > $PKG/install/doinst.sh - -cd $PKG -/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE diff --git a/plymouth/plymouth.info b/plymouth/plymouth.info deleted file mode 100644 index 8f8beef..0000000 --- a/plymouth/plymouth.info +++ /dev/null @@ -1,10 +0,0 @@ -PRGNAM="plymouth" -VERSION="26.134.222" -HOMEPAGE="https://www.freedesktop.org/wiki/Software/Plymouth/" -DOWNLOAD="https://www.freedesktop.org/software/plymouth/releases/plymouth-26.134.222.tar.xz" -MD5SUM="4b3af5529def5e3b1c986cb321c82f22" -DOWNLOAD_x86_64="" -MD5SUM_x86_64="" -REQUIRES="" -MAINTAINER="danix" -EMAIL="danix@danix.xyz" diff --git a/plymouth/slack-desc b/plymouth/slack-desc deleted file mode 100644 index 986ded9..0000000 --- a/plymouth/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. -# Line up the first '|' above the ':' following the base package name, and -# the '|' on the right side marks the last column you can put a character in. -# You must make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':' except on otherwise blank lines. - - |-----handy-ruler------------------------------------------------------| -plymouth: plymouth (graphical boot splash) -plymouth: -plymouth: Plymouth provides a flicker-free graphical boot process. It relies -plymouth: on kernel mode setting (KMS) to set the native resolution of the -plymouth: display as early as possible, then shows a splash screen leading up -plymouth: to the login manager. Boot messages remain available by pressing the -plymouth: Esc key during boot. -plymouth: -plymouth: Homepage: https://www.freedesktop.org/wiki/Software/Plymouth/ -plymouth: -plymouth: |